I am taking the engine (Vulvan) and trans (AX4N) out of a 97 Ford Taurus Wagon. I have an engine hoist, which came equipped with s short chain and a single hook. I do have some lengths of strong chain on hand also. I have everything unhooked and am ready to lift the assembly out. I can get the chain…

Don’t do any chain wrapping around anything. Have the hangers that were used for factory engine installation of your engine gone missing? You will have to use hooks in brackets for control and safety. I can’t advise the wrapping of the chain around parts even if secured by a bolt, a slip up here cou…

You’re thinking of pulling the engine trans combo out with a single attachment point? Better have a bunch of husky friends over to help muscle it around as it comes up&out. A tilt mechanism with two chains is much better. At a minimum, you want the hoist hook on the center of a sling chain to two at…

I definitely want to do this safely. I don’t see anything in there that resemble hangers that would have been used by the factory for putting the engine in. But I will look again. I do have plenty of muscle - have 5 sons and plenty of pry bars for finagling the engine (once it is being safely hoist…

if engine does not have obvious hookup points remove one bolt from each side at the farthest point in a diagonal use those holes to bolt on chain. keep chain tight to engine and the arm on lift as short and close as possible in order to clear the grill when lifted

How to attach an Engine hoist?

Maintenance/Repairs

popof9 August 21, 2010, 7:23pm 8

Thanks everybody for your input. I got a sling from advance auto parts, bolted it to heads as suggested, it attached very nicely to lift hook, and engine/trans came out very smoothly and safely.

Topic		Replies	Views
73 Chevy Nova 250 l6 removal Maintenance/Repairs engines	11	1828	April 29, 2009
Transmission mount Maintenance/Repairs ford , focus	1	335	February 12, 2010
84 ford F150 V8 5.0L engine lift points Maintenance/Repairs ford	4	3256	February 13, 2017
2AZ-FE Motor Mount Replacement Maintenance/Repairs	9	3644	November 28, 2020
Mercury milan 2006 i4 2.4 liter FWD Maintenance/Repairs mercury , milan	10	792	September 2, 2018

How to attach an Engine hoist?

Related topics