I have a 1994 ford ranger and the turning signal lever switch on the left of the steering wheel which was fully functional for a bit, was iffy yesterday and now only works for twisting to get the wipers on. It’s completely useless for turning on the turning signals (left or right) though. I knee’d t…

Name: Replace the Turn Signal & Wiper Switch- 92 to 96 F150 and Bronco @GettinJunkDone
Uploaded: 2023-01-27T01:33:02Z
Description: Typical multi-function switch replacement on a Ford of this vintage. [Replace the Turn Signal & Wiper Switch- 92 to 96 F150 and Bronco @GettinJunkDone] Tester

Typical multi-function switch replacement on a Ford of this vintage. [Replace the Turn Signal & Wiper Switch- 92 to 96 F150 and Bronco @GettinJunkDone] Tester

The hard part is usually getting the steering wheel off and back on in same position. Not that difficult, but requires a special puller tool. And procedure info on what parts to remove (& how) before you can attach the puller. Be sure to mark the SW orientation with respect to shaft before remo…

Do not remove the steering wheel, watch the video.

[image] George_San_Jose1: The hard part is usually getting the steering wheel off and back on in same position No it isn’t, steering wheel doesn’t need to come off. 3 screws for the column cover, 2 screws for the switch, 3 electrical plugs and it’s off Should be able to do whole job in 45 m…

Was George guessing again or just responding to a thread to satisfy his need to be noticed ?

A diyer has to remove the steering wheel for that job on quite a few car designs, my Corolla for example. But no need to remove steering wheel on the Ford Ranger? Good idea, congrats to Ford designers.

Turn signal lever never fails on Toyota.

[image] George_San_Jose1: A diyer has to remove the steering wheel for that job on quite a few car designs, my Corolla for example. Your Corolla is an outdated design. Chrysler began using side mounted multi-function switches in 1990, most manufactures phased out the old style turn signal swi…

That’s a good thing imo, what with the steering wheel air-bag you’d otherwise have to deal with in many current designs. @Tester here posts photos of multifunction switches fairly often, and usually they appear to be the type that would require the steering wheel removed. No dispute that a 30 ye…

Turning signal switch broken, how do I replace it?

Maintenance/Repairs

Tester January 27, 2023, 1:33am 2

Typical multi-function switch replacement on a Ford of this vintage.

Tester

Topic		Replies	Views
1990 Chevy S-10 turn signal/wiper problem Maintenance/Repairs	7	6008	August 1, 2007
1996 Escort Turn Signal Maintenance/Repairs ford , steering , escort , wheels	3	819	April 13, 2010
Turn signal switch 2004 buick park avenue Maintenance/Repairs parkingbrakes , buick	1	878	September 10, 2010
Replacing the wiper switch on a Ford Econoline E250? Maintenance/Repairs ford , electrical-wiring	4	1279	April 13, 2014
Replacing Turn Signal Switch -- by a novice? Maintenance/Repairs pontiac	2	783	March 31, 2009

Turning signal switch broken, how do I replace it?

Related topics