Hi I am thinking about replacing the battery in my key fob for my 2002 BMW 330Ci E46. I vaguely remember reading these fobs have RFIDs in them to open the car. Not sure if this applies to both the keyless and keyed entry. Say I mess up somehow and fry the circuity for the keyless entry… will the key…

Never mind Edit: yeah, who knew. Just replace it

The keyless entry battery is soldered in place and the key handle is glued shut. The easy solution is to replace the key. The link below shows information for do-it-yourself key battery replacement. DIY: E46 Key Battery Replacement (bimmerforums.com)

@Nevada_545 Easy … but expensive… IIRC when I called the local bimmer dealers a couple years ago it was going to cost ~$300+. Definitely not throwing away that much money when I can fix it myself. Still have the same question though - if I mess up will the key still work? I’ve watched a video on rep…

It’s just a normal key fob is easy, but obviously Nevada had the unique issues with this one. So the who knew was related to who knew it was that complicated for a simple battery change on conventional fobs. That’s why I just deleted my comment on how to do it, and the link Nevada provided covered…

Don’t you have 2 key fobs ? If you break one the other should still work . Or if you have a Batteries Plus near you call and see if they can put a new battery in for you.

I believe the keyless entry transmitter in in the key handle, no separate fob. The original keys can’t be easily disassembled like most others, the housing is glued together. The battery was supposed to be charged via induction from the immobilizer antenna, however that battery is 22 years old. Re…

[image] riverofwind: if I mess up will the key still work? I’ve watched a video on replacement and it looks within my pay grade No experience with BMW key fobs, but be careful, & wear eye protection & face shield if soldering directly to a battery. It could explode if overheated. Me, I hav…

I went to batteries plus once to have a new battery put in my shaver. They used what looked like a little spot welder for the contacts. A couple quick sparks and all done. Some reassembly required.

BMW E46 Key Fob Battery Replacement

Maintenance/Repairs

wolyrobb July 23, 2024, 6:43pm 7

The door should still unlock with the key, the lock cylinder might need to be lubed though.

Topic		Replies	Views
Key fob won't work, battery fine Maintenance/Repairs chevrolet , cobalt	28	99887	April 26, 2018
Replacing the key fob for a 2007 BMW X5 Maintenance/Repairs bmw , x5	3	1220	April 29, 2018
What do you do when the Key Fob Battery is Dead? General Discussion	23	5930	January 31, 2023
DIY Mini car keys fob fix Maintenance/Repairs keys , mini	11	1806	June 22, 2017
2006 Chevy Malibu Key Fob died Maintenance/Repairs chevrolet	8	5807	May 1, 2015

BMW E46 Key Fob Battery Replacement

Related topics