I have a 93 ford taurus 3.8L V6 automatic GL. What size socket do I need to remove my oil pressure switch?

It might be a special socket made for that job…Channel-Locks can sometimes be substituted if there is access. Please, please, don’t break it off…

A 6 point socket might fit, but there used to be a special socket just for that purpose.

Buy a new oil pressure switch and see what fits it. Some parts stores have a tool loaner program.

They actually make a special oil pressure switch socket. http://www.amazon.com/Lisle-13250-Pressure-Switch-Socket/dp/B0002SR2RY Call local parts stores and one will have one in stock. Tester

You’ll definitely want to use one that fits.

There might be a specialty socket for this. I had to buy one for my Vega. I still have it. It’s a weird socket size…

I’m with oldtimer. Buy the new sender and see what you need. And actually, on many of the oil pressure senders with plastic housings, breaking the top off gives access to the stem with is a common size hex. If you find a McParts store with a knowledgeable counterman you might get some quick answers …

What socket do I need to remove my oil pressure switch on my 93 taurus?

Maintenance/Repairs

americar February 12, 2012, 6:58am 3

Can’t remember what size but I think oil pressure switches are made in such a way that only a six point deep socket will work.

Topic		Replies	Views
Oil pressure gauge not working Maintenance/Repairs chevrolet , s-10-blazer	24	1651	August 30, 2021
Fuel tank sender unit wrench Maintenance/Repairs	4	1950	September 26, 2008
Simple problem turns into a stubborn one Maintenance/Repairs plug , pontiac	12	1472	December 8, 2010
1999 Toyota Camry-oil sender leaking oil Maintenance/Repairs toyota , camry	3	856	May 5, 2010
A slippery oil situation (96 Ford) Maintenance/Repairs ford , taurus	5	945	December 26, 2010

What socket do I need to remove my oil pressure switch on my 93 taurus?

Related topics