I’m trying to remove my car door latch and it is held on by three T30 torx bolts. I got two of them out but the last one is stripped or something. When I put my torx bit on it and turn it, there is some space on the head (near edges) so it doesn’t really turn the bolt. It keeps falling out, if you k…

I was wondering where they’d have left hand drill bits.

I’d suggest posting a picture of the fastener head so people can give more specific advice. Once you experience breaking off, or worse yet, shattering an EZ-Out, you look at them in a different light from that point forward. :grimacing:

Is there something in the bolt that keeps the torx bit from going down all the way? It’s hard to strip a torx bolt when the bit is pushed in properly and it is the right size.

I forgot to add some pictures yesterday. I think it is a round head torx screw. I’m trying to change the door latch and this last torx screw is the only thing holding it in. I got the other 2 screws out. The problem is that when I put torx bit/socket on it and try to unscrew it by turning it, my tor…

Tap on one of the extractors in the kit I showed and the screw will come out. [The Easiest Way to Remove a Broken Bolt or Rounded Bolt Head - Screw & Bolt Extractor Kits] Tester

I am not sure if extractor works for this top screw because it kinda curves up right near the screw. Don’t you have to put the extractor on the screw and push it all the way down? If you look at the picture, on the right side of the screw, it kinda curves up.

The extractor will grab that screw. No problem. Tester

Grind head off. Then latch will come out

I’m not sure what they are called but there are several varieties of torx that look similar. I think you are using the wrong one. Tester would know. It’s come up before and the wrong torx will give a sloppy fit.

[image] Torx vs. Torx Plus: Differences, Pros and Cons An in-depth comparison of Torx and Torx Plus drives & compatibility explained with pics. See why the plus design is better than regular Torx. Est. reading time: 7 minutes But the point is moot. …

How to remove stripped torx bolt?

Maintenance/Repairs

Tester May 13, 2023, 6:05pm 25

But the point is moot.

The head is already stripped out.

Tester

Topic		Replies	Views
Stripped Torx Tricky Place — Help! Maintenance/Repairs volkswagen	2	696	June 24, 2019
Broken hex bolt removal Maintenance/Repairs	26	5390	November 4, 2013
Recomended tools to remove a bolt with a snaped head? General Discussion	45	7482	February 24, 2017
Idle control valve bolt seems to be stripped not sure what to do Maintenance/Repairs bmw , 330	51	11676	November 1, 2016
Snapped a T40 star bit Maintenance/Repairs dodge , magnum	14	5462	July 9, 2020

How to remove stripped torx bolt?

Related topics