Just replaced crank position sensor this morning with a new one. Started the engine ran fine. I hose down the engine and now it will not start again. So the run down is new cap, rotor, cam position sensor, crank position sensor, wires, plugs. It has spark, but I can not be sure if the spark is at the right timing. Once is a while it will back fire or kick. The engine will abruptly halt as I am turning it over, as if the plug is firing out of time and fighting the starter. I did spray starting fluid in the intake and it does not help. I’ll check on the Passlock system.
Related topics
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| 2000 Blazer HATES damp weather | 4 | 995 | February 9, 2011 | |
| 96 blazer won't start | 3 | 421 | February 17, 2012 | |
| 97 Jimmy, 4.3- Crank, but No Start in Rain/Humidity | 15 | 10223 | January 19, 2014 | |
| 1998 chevrolet blazer doesnt like cold mornings | 9 | 1303 | March 15, 2009 | |
| 1998 Chevy S10 Blazer | 2 | 902 | March 22, 2011 |