Saw this picture, pretty neat. Useful for folks who can’t understand a wear bar.[replace%20tire]

That was photo-shopped or someone used a hot tool to spell that out on the tire. I don’t thin there is any way to mold that into the tread ( @CapriRacer weight in, please) to appear later. Notice the wear bars are still visible and are not at the same level as the tread. That means they are still le…

I see the words but I can’t spot the wear bars. Help me out, please, pointing out where to look as furthering my education. :slightly_smiling_face:

[image] Marnet: I see the words but I can’t spot the wear bars. From the “R” in “REPLACE”, go a short distance up and left or a short distance down and left. I think that’s them.

[image] lion9car: From the “R” in “REPLACE”, go a short distance up and left or a short distance down and left. I think that’s them. Thank you. I wondered if that might be the wear bars. But I’m looking on a phone screen and can’t clearly see if it is wear bars or small rock grit in the tre…

No, not photoshopped. I’ve seen that on tires too. In fact, one manufacturer, I believe it’s either General or Nokian, actually has 80% 60% 40% etc etched into the center rib of the tread. Next time I see one come in I’ll take a pic.

Wow, I’d really like to know how they do that! A dissolving solid for the letters in the rubber? Molded on the underside of the tread cap?? Call out to CapriRacer again!

[image] Mustangman: That was photo-shopped or someone used a hot tool to spell that out on the tire. I don’t think there is any way to mold that into the tread ( @CapriRacer weight in, please) to appear later. That is for real. Let’s see if I can find it. Ah. It’s a General Tire. Here’s a …

Now I’d like to see a “NO SNOW USE” indicator added to show at the proper depth.

[image] lion9car: Now I’d like to see a “NO SNOW USE” indicator added to show at the proper depth. How about the Continental Extreme Contact DWS Link: https://www.tirerack.com/tires/tires.jsp?tireMake=Continental&tireModel=ExtremeContact+DWS

Tire wear indicator

General Discussion

common-sense-answer January 22, 2019, 5:01pm 20

Bing, how about… some imbedded lettering (as in original discussion post photo) utilizing some imbedded ink?

Then when the tires are worn out and the owner/operator/driver neglects them, the tires could print a message up and down the driveway that could help make the problem more apparent. One possible message could say, “I SUCK AT TIRE SAFETY MAINTENANCE!”

CSA

Topic		Replies	Views
Goodyear tires tread depth indicators General Discussion	20	9749	January 13, 2021
New Tires? Maintenance/Repairs	7	329	October 3, 2008
Tires Maintenance/Repairs	6	589	August 10, 2007
New tires came in! ...but stripes? pic included Maintenance/Repairs	45	56433	February 13, 2020
Tread wear pattern relating to tire replacement Maintenance/Repairs tires	10	2077	July 13, 2016

Tire wear indicator

Related topics