Is there a way to disarm the vehicle alarm system without the remote so that you can start the vehicle? I have searched the internet and the user manual is no help. The scenario is that I’m hundreds of miles from home, I lose the remote, or remote battery dies, and now I cannot start the vehicle, es…

With all factory installed alarms I have worked with you can view a menu through a proprietary scanner, perhaps the options you seek will be found this way. With FORD factory installed alarms simply using the door key in the drivers door worked, it was a normal key,nothing smart about it. Try it out…

I have tried disarming with the key. I am not certain if it was factory or dealer installed. I have not been able to find any kind of reset switch under or around the dash. From what I have been able to find, nothing in the manuals say that you can disarm with just the key, unless the system is in p…

I’ve never heard of a factory system that requires the remote.

You SHOULD have a valet mode button or switch in the vehicle. You turn the ignition on and push the button or switch. Does your vehicle have a little red flashing led light on the dash anywhere? This would give me an idea of your system.

It has a security light and glass breakage sensor. Here is a link to the manual to program it. This contains pic’s of exactly what it looks like. http://www.toyotapart.com/TOYOTA_VIP_RS3000_PROGRAMMING_T-AX99-005.pdf

It is good you found a document describing how to program the remotes in your Dealer installed alarm system, now all you have to do is find the operators manual for this system

http://www.parksoffroad.com/tacomamods/alarminfo/alarminfo.htm This link contains the extent of what I could find. It still does not answer my main question, which is how to start the vehicle when you cannot disarm the alarm system with the remote. They leave out the possiblity of an inoperable rem…

You should be able to disarm the system with the ignition key. Open the passenger door the security light will blink quickly. Put key in the ignition, the turn the ignition on within 15 seconds, but do not start the car. The security light should go out. The system is disarmed. I got this from he…

If you disconect the battery open the key connect the battery and then start the car that might work

Problem disarming security alarm system without remote

Maintenance/Repairs

mchef8 February 16, 2011, 3:29am 10

Yes, I did see that as well, thanks for pointing that out. That requires that the system be in passive mode, which it currently is not. I was just hoping there would be another way, like disarming with a key turn in the ignition whether passive or active.

Topic		Replies	Views
Alarm Remote Maintenance/Repairs	3	474	April 4, 2009
1995 Toyota Camry: dead battery + no alarm remote = fun times Maintenance/Repairs toyota , alarm , camry , batteries	4	3210	September 8, 2010
Disconnecting Aftermarket Toyota Camry Alarm Maintenance/Repairs toyota , alarm , camry	4	4464	December 11, 2010
Permanently disable alarm on 1999 Camry Maintenance/Repairs	9	22435	December 3, 2012
1997 Volkswagen Golf - car alarm Maintenance/Repairs alarm , golf , volkswagen	2	817	May 4, 2009

Problem disarming security alarm system without remote

Related topics