Let me update my problem. After driving the car around without the family so I could actually hear and pay attention to what was going on, this is what I found. I don’t believe this is caused by a belt, but possibly a bearing. The noise starts when I slowly go forward, foot on the gas/brake or not, there is a grind or popping sound. When I increase speed, the sound stops and there is no noise when at cruising speed. It only appears to be when I am creeping along at a very slow speed, such as when you take your foot off the brake and the car eases forward without stepping on the gas or when I first start pulling off, and again, this isn’t all the time. Is this a wheel bearing, or maybe a bad CV joint? I am puzzled. Thanks for any ideas ahead of time. Oh, and as for the post of the tensioner bolt earlier, the local dealership couldn’t tell me what size it was. I had to call a dealership out of town to get the right size bolt.