1999 Plymouth Grand Voyager - all the gauges tach, speedo, fuel, etc., do not function on a restart after about a drive of 20 miles or so. Any suggestions where I should start looking? gates

It’s likely your Voyager is suffering from the same defect that afflicts most Chrysler cars of that era – solder breaks on the back of the instrument cluster. These breaks result from the cheap method of cold soldering that Chrysler used at that time for their manufacture. The mechanic’s solution …

Great video clip, Steve. If I interpret what you say, the most likely culprets are the IC connections on the board. What makes these the likely problem… what about the other solder connections? Back in my day, these boards were wave soldered so that all connections should be equal. You mention c…

Give credit to the guy who made the video. I cannot offer any technical details about Chrysler’s manufacturing process, other than to say that it was supposed to be a cost-saving method that produced circuit boards that worked well for several years but eventually suffered failure. Many makes/mode…

Thank you - we are up and running.

Instrument cluster

Maintenance/Repairs

SteveF July 20, 2011, 2:45pm 6

So tell us – how did you resolve this? What was the problem and how did you fix it?

Topic		Replies	Views
Dashboard electronics-98 plymouth voyager Maintenance/Repairs plymouth , voyager	2	554	October 14, 2009
None of the instruments on the dashboard are working right - Help! Maintenance/Repairs	17	1661	April 4, 2014
Dead Instrument Cluster Maintenance/Repairs	2	452	September 6, 2011
1997 Intrepid Instrument Cluster Shorting Out Maintenance/Repairs dodge , intrepid	4	2394	January 8, 2012
Failure of dash indicators Maintenance/Repairs chrysler , towncountry	4	1060	October 5, 2013

Instrument cluster

Related topics