# \#dynasty

**URL:** https://community.cartalk.com/tag/dynasty/7496.md

[Latest](https://community.cartalk.com/latest.md) · [Categories](https://community.cartalk.com/categories.md) · [Tags](https://community.cartalk.com/tags.md)

---

## [1989 Dodge Dynasty Electrical System](https://community.cartalk.com/t/1989-dodge-dynasty-electrical-system/141573)

<div class="topic-metadata">

**Author:** [@christian992207\_152870](https://community.cartalk.com/u/christian992207_152870)\
**Replies:** 14\
**Last updated:** [June 22, 2019, 3:51am UTC](https://community.cartalk.com/t/1989-dodge-dynasty-electrical-system/141573 "2019-06-22T03:51:56Z")

</div>

I drive an 89 dodge dynasty and the electrical system has not been working. The battery has been tested and works fine and i have tried two different alternators. However when i go up to autozone the battery tester says…

---

## [Will I damage my alternator if I remove the negative battery post?](https://community.cartalk.com/t/will-i-damage-my-alternator-if-i-remove-the-negative-battery-post/115293)

<div class="topic-metadata">

**Author:** [@VictoriaSuarez](https://community.cartalk.com/u/VictoriaSuarez)\
**Replies:** 2\
**Last updated:** [April 9, 2018, 2:49am UTC](https://community.cartalk.com/t/will-i-damage-my-alternator-if-i-remove-the-negative-battery-post/115293 "2018-04-09T02:49:43Z")

</div>

If i remove the neg battery post on my 1991 dodge dynasty le 3.3L. Can i damage my alternator?

---

## [Hot car won't start](https://community.cartalk.com/t/hot-car-wont-start/81749)

<div class="topic-metadata">

**Author:** [@DJDodge](https://community.cartalk.com/u/DJDodge)\
**Replies:** 3\
**Last updated:** [October 12, 2013, 3:59am UTC](https://community.cartalk.com/t/hot-car-wont-start/81749 "2013-10-12T03:59:37Z")

</div>

'92 Dynasty is a good runner, but, once the engine gets warmed up, I shut off the engine at my own risk. If the car sits for a while with the hood open, it will start again, but attempting to start immediately after shu…

---

## [Car won't idle](https://community.cartalk.com/t/car-wont-idle/57202)

<div class="topic-metadata">

**Author:** [@dakingofwyoming](https://community.cartalk.com/u/dakingofwyoming)\
**Replies:** 4\
**Last updated:** [November 5, 2010, 7:14pm UTC](https://community.cartalk.com/t/car-wont-idle/57202 "2010-11-05T19:14:23Z")

</div>

My car wouldn't idle when the A/C or defrost was on and now it has problems (and not every time) idling and will even die when it is moving. My mechanic, though I use the term loosely, put in a new MAP sensor but that d…

---

## [Dynasty Mystery!](https://community.cartalk.com/t/dynasty-mystery/48587)

<div class="topic-metadata">

**Author:** [@Anner007](https://community.cartalk.com/u/Anner007)\
**Replies:** 8\
**Last updated:** [June 26, 2010, 4:41pm UTC](https://community.cartalk.com/t/dynasty-mystery/48587 "2010-06-26T16:41:04Z")

</div>

I inherited a 1992 Dodge Dynasty from my Grandma a few years ago. Starting last summer, Dorothy (I named her after my grandma) will start sputtering at times. It usually starts around 40mph and I have to gun it to get he…

---

## [1990 dodge dynasty/ heater](https://community.cartalk.com/t/1990-dodge-dynasty-heater/40520)

<div class="topic-metadata">

**Author:** [@washbrat](https://community.cartalk.com/u/washbrat)\
**Replies:** 2\
**Last updated:** [December 9, 2009, 3:12pm UTC](https://community.cartalk.com/t/1990-dodge-dynasty-heater/40520 "2009-12-09T15:12:20Z")

</div>

If there is hot water in the heater core,why can't I get heat out of my vents?

---

## [91 dodge dynasty shift cable and cable rod](https://community.cartalk.com/t/91-dodge-dynasty-shift-cable-and-cable-rod/37144)

<div class="topic-metadata">

**Author:** [@Dodge\_Die\_Nasty](https://community.cartalk.com/u/Dodge_Die_Nasty)\
**Replies:** 2\
**Last updated:** [September 26, 2009, 5:18am UTC](https://community.cartalk.com/t/91-dodge-dynasty-shift-cable-and-cable-rod/37144 "2009-09-26T05:18:48Z")

</div>

Here's the problem: http://img...ftleve.jpg I fiddled around trying to get this cable rod re-attached to the shift lever and the angle isn't there. I suspect that this piece was designed as a straight section a…
