# Wire Harness won't open

**URL:** <https://community.cartalk.com/t/wire-harness-wont-open/36274>\
**Category:** Maintenance/Repairs\
**Tags:** accord, honda\
**Created:** [September 7, 2009, 5:16pm UTC](https://community.cartalk.com/t/wire-harness-wont-open/36274 "2009-09-07T17:16:02Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![roykahn](https://avatars.discourse-cdn.com/v4/letter/r/bbce88/32.png) [@roykahn](https://community.cartalk.com/u/roykahn)\
**Post date:** [September 7, 2009, 5:16pm UTC](https://community.cartalk.com/t/wire-harness-wont-open/36274/1 "2009-09-07T17:16:02Z")

</div>

I am trying to remove the distributor so I can replace the Ignition Control Module and I can’t get the grey wire harness to open so I can remove the distributor from the car. I press the little tab and it releases one side but the far side sticks. I know it opens because when I push it back together it goes click. There is no locking tab on the other side and I can’t pry it open. Suggestions? Thanks.