# Window regulator cable woes

**URL:** <https://community.cartalk.com/t/window-regulator-cable-woes/166525>\
**Category:** Maintenance/Repairs\
**Tags:** liberty, jeep\
**Created:** [June 29, 2020, 1:40am UTC](https://community.cartalk.com/t/window-regulator-cable-woes/166525 "2020-06-29T01:40:18Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![ChristopherAA](https://avatars.discourse-cdn.com/v4/letter/c/3bc359/32.png) [@ChristopherAA](https://community.cartalk.com/u/ChristopherAA)\
**Post date:** [June 29, 2020, 1:40am UTC](https://community.cartalk.com/t/window-regulator-cable-woes/166525/1 "2020-06-29T01:40:18Z")

</div>

Recently, the cable on my rear drivers side window regulator snapped. I have tried and tried to search for a replacement or a repair kit but I’m having no luck. I know these parts exist because I see them around for other makes and models, just not for mine (2010 Jeep Liberty Sport 3.7L). Does anyone know where I might be able to get a replacement cable? Thanks in advance.

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [June 29, 2020, 1:44am UTC](https://community.cartalk.com/t/window-regulator-cable-woes/166525/2 "2020-06-29T01:44:44Z")

</div>

Have you tried here?

[https://www.rockauto.com/en/catalog/jeep,2010,liberty,3.7l+v6,1445139,interior,window+regulator+&+motor+assembly,15596](https://www.rockauto.com/en/catalog/jeep,2010,liberty,3.7l+v6,1445139,interior,window+regulator+&+motor+assembly,15596)

Tester

---

<div class="post-metadata">

**Author:** ![ChristopherAA](https://avatars.discourse-cdn.com/v4/letter/c/3bc359/32.png) [@ChristopherAA](https://community.cartalk.com/u/ChristopherAA)\
**Post date:** [June 29, 2020, 1:52am UTC](https://community.cartalk.com/t/window-regulator-cable-woes/166525/3 "2020-06-29T01:52:04Z")

</div>

I have, actually. This might be the rout I end up taking. However, I was hoping to just find the cable itself as I know how to install it in the existing regulator assembly. Thank you for the reply!

---

<div class="post-metadata">

**Author:** ![Rod-Knox](https://avatars.discourse-cdn.com/v4/letter/r/a183cd/32.png) [@Rod-Knox](https://community.cartalk.com/u/Rod-Knox)\
**Post date:** [June 29, 2020, 1:00pm UTC](https://community.cartalk.com/t/window-regulator-cable-woes/166525/4 "2020-06-29T13:00:18Z")

</div>

I never had much luck with replacing the plastic’ bathtub stopper chains’ in regulators and long ago gave up. Save the grief and replace the entire regulator.

---

<div class="post-metadata">

**Author:** ![ChristopherAA](https://avatars.discourse-cdn.com/v4/letter/c/3bc359/32.png) [@ChristopherAA](https://community.cartalk.com/u/ChristopherAA)\
**Post date:** [June 29, 2020, 1:21pm UTC](https://community.cartalk.com/t/window-regulator-cable-woes/166525/5 "2020-06-29T13:21:06Z")

</div>

It’s more like a braided cable in this case. I’ll probably just drop the eighty-ish bucks to get the whole regulator assembly. The last thing I’m mulling over is going to a U Wrench It or junk yard to see if they have my make/model and just yank the cable out of the regulator assembly. The general consensus, however, is that I just need to buy the whole kit and caboodle as you mentioned.

---

<div class="post-metadata">

**Author:** ![jtsanders](https://avatars.discourse-cdn.com/v4/letter/j/c2a13f/32.png) [@jtsanders](https://community.cartalk.com/u/jtsanders)\
**Post date:** [June 29, 2020, 5:30pm UTC](https://community.cartalk.com/t/window-regulator-cable-woes/166525/6 "2020-06-29T17:30:19Z")

</div>

Buy the whole regulator assembly. Those prices aren’t that bad, and the motors won’t last forever.

---

<div class="post-metadata">

**Author:** ![Nevada\_545](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/nevada_545/32/41232_2.png) [@Nevada\_545](https://community.cartalk.com/u/Nevada_545)\
**Post date:** [June 29, 2020, 5:42pm UTC](https://community.cartalk.com/t/window-regulator-cable-woes/166525/7 "2020-06-29T17:42:25Z")

</div>

The cable anchor points in the glass lift plate are usually plastic and break. When the cable comes loose it gets bound up in the motor and damages the spool.

Replace the regulator assembly.

---

<div class="post-metadata">

**Author:** ![eddo](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/eddo/32/2594_2.png) [@eddo](https://community.cartalk.com/u/eddo)\
**Post date:** [June 29, 2020, 7:21pm UTC](https://community.cartalk.com/t/window-regulator-cable-woes/166525/8 "2020-06-29T19:21:55Z")

</div>

sounds like a whole lot of effort to avoid replacing a 10 year old motor. But whatever floats your boat.
