# Winding starter **URL:** \ **Category:** Maintenance/Repairs\ **Tags:** endeavor, mitsubishi\ **Created:** [September 15, 2019, 8:03am UTC](https://community.cartalk.com/t/winding-starter/148788 "2019-09-15T08:03:41Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Adam\_Mikkelsen](https://avatars.discourse-cdn.com/v4/letter/a/e95f7d/32.png) [@Adam\_Mikkelsen](https://community.cartalk.com/u/Adam_Mikkelsen)\ **Post date:** [September 15, 2019, 8:03am UTC](https://community.cartalk.com/t/winding-starter/148788/1 "2019-09-15T08:03:41Z")
I bought a reman starter for my 05 endeavour put it on n go to start it n all it’s doing is spinning it’s not engaging to flywheel , I pull it off do a home test n the Bendix is engaging n working properly , I take it to Auto zone do a bench test with computer n it checks out but when I put it on it does not work I’m getting proper amps to all wires n ignition Battery is putting out 13 plus v. O cleaned the area for proper ground … Still jus spinning I tried returning the starter but can’t cause it checks out as a workin unit ---
**Author:** ![It\_s-Me](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/it_s-me/32/12660_2.png) [@It\_s-Me](https://community.cartalk.com/u/It_s-Me)\ **Post date:** [September 15, 2019, 10:18am UTC](https://community.cartalk.com/t/winding-starter/148788/2 "2019-09-15T10:18:18Z")
Have you checked the flywheel to make sure there are any teeth on it for the starter to engage to ? ---
**Author:** ![Adam\_Mikkelsen](https://avatars.discourse-cdn.com/v4/letter/a/e95f7d/32.png) [@Adam\_Mikkelsen](https://community.cartalk.com/u/Adam_Mikkelsen)\ **Post date:** [September 15, 2019, 10:27am UTC](https://community.cartalk.com/t/winding-starter/148788/3 "2019-09-15T10:27:57Z")
Yes on both the starter n the flywheel , teeth are in great shape