# Wheel studs breaking off

**URL:** <https://community.cartalk.com/t/wheel-studs-breaking-off/194318>\
**Category:** Maintenance/Repairs\
**Created:** [February 5, 2024, 7:51pm UTC](https://community.cartalk.com/t/wheel-studs-breaking-off/194318 "2024-02-05T19:51:15Z")\
**Posts on this page:** 12\
**Page:** 4

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [February 8, 2024, 11:30pm UTC](https://community.cartalk.com/t/wheel-studs-breaking-off/194318/63 "2024-02-08T23:30:36Z")

</div>

> [@davesmopar](#):
>
> It is clear you have not worked on a lot different vehicles, like Honda’s… lol

True, I have no Honda experience at all. Plus I’ve never had to replace a wheel stud on any of my vehicles. But the vdo’s seem to make it look pretty easy, using a stack of washers to help pull the stud through.

> **[Replacing a Wheel Stud: Step-by-Step DIY Guidance](https://www.wikihow.com/Replace-Stud-on-Wheel)**
>
> Driving with a broken wheel stud (lug stud) on your vehicle can be dangerous, but you don't have to head to the repair shop for a pricey fix. In fact, it's a very DIY-friendly job, and we're here to walk you through the entire process!...

---

<div class="post-metadata">

**Author:** ![ChrisTheTireWhisperer](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/christhetirewhisperer/32/34798_2.png) [@ChrisTheTireWhisperer](https://community.cartalk.com/u/ChrisTheTireWhisperer)\
**Post date:** [February 8, 2024, 11:41pm UTC](https://community.cartalk.com/t/wheel-studs-breaking-off/194318/64 "2024-02-08T23:41:48Z")

</div>

> [@George\_San\_Jose1](#):
>
> - Do your own tire-related work. Then you can do it however you think is best.

Again, I must repeat myself, as I did to another participant:

I don’t do things “how I think is best”, I do things _according to specifications_. I don’t know how to make that clear enough to some of you.

As to your second point, “letting the shop do their work, and replace any studs that get broken”

That is ridiculous.

If shops and service departments DO THEIR JOBS CORRECTLY, there should be no broken studs or warped rotors.

---

<div class="post-metadata">

**Author:** ![nofyfb\_180405](https://avatars.discourse-cdn.com/v4/letter/n/22d042/32.png) [@nofyfb\_180405](https://community.cartalk.com/u/nofyfb_180405)\
**Post date:** [February 9, 2024, 12:37am UTC](https://community.cartalk.com/t/wheel-studs-breaking-off/194318/65 "2024-02-09T00:37:26Z")

</div>

I’ve never heard of rims - steel or otherwise - causing studs to break. I remember from my professional days as a Mechanical Breakdown Inspector that chrysler in its infinite wisdom and attention to detail and customer satisfaction (ATTENTION: SARCASM!) installed soft alloy studs on its masterpieces so that wheels could only be installed once. The second time threads stripped. I wouldn’t be surprised if subaru cut corners now like chrysler has always done. In any case, if stud nuts are over-tightened, they either break immediately or - in case of some ford or bmw - cause rotors to warp. In other words, my guess is that the stealer broke the studs and “did not notice” but good luck looking for sympathy from them.  
My solution is: NEVER let anyone touch my vehicles. In rare cases (new tires), check studs on the spot and check torque/re-tighten when get home.

---

<div class="post-metadata">

**Author:** ![YoshiMoshi3](https://avatars.discourse-cdn.com/v4/letter/y/8dc957/32.png) [@YoshiMoshi3](https://community.cartalk.com/u/YoshiMoshi3)\
**Post date:** [February 9, 2024, 2:04am UTC](https://community.cartalk.com/t/wheel-studs-breaking-off/194318/66 "2024-02-09T02:04:40Z")

</div>

I had this problem before. When using a torque wrench, did you “click it twice”? Essentially double checked that you got the right torque. I found that when I did this, on the second time, the nut would spin a little bit, resulting in more torque. It’s best to have confidence in your tool or don’t, so no need to double check. Only click once.

---

<div class="post-metadata">

**Author:** ![ChrisTheTireWhisperer](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/christhetirewhisperer/32/34798_2.png) [@ChrisTheTireWhisperer](https://community.cartalk.com/u/ChrisTheTireWhisperer)\
**Post date:** [February 9, 2024, 3:10am UTC](https://community.cartalk.com/t/wheel-studs-breaking-off/194318/67 "2024-02-09T03:10:38Z")

</div>

Good advice.

Also, I’m not completely rigid on the “spec torque” thing: Anything up to 5 ft lbs over spec I consider not over-tightened. Especially original lugnuts on a vehicle 5-15 years old.

---

<div class="post-metadata">

**Author:** ![cigroller](https://avatars.discourse-cdn.com/v4/letter/c/c68b51/32.png) [@cigroller](https://community.cartalk.com/u/cigroller)\
**Post date:** [February 9, 2024, 3:34am UTC](https://community.cartalk.com/t/wheel-studs-breaking-off/194318/68 "2024-02-09T03:34:02Z")

</div>

Generally speaking I click once in the sequence, and then run around once more and click. It’s partly just about making sure / double-checking that I did hit every fastener. This is relatively easy with 4 or 5 or even 6 lugs - but get onto something like an oil pan with 10 or 12 with lots of criss-crossing and sometime diagonals and whatnot, and I’d like to make sure I didn’t just space out and miss one.

The key is not how many clicks, really. It’s to not apply any more torque after the click. Check 'em 5 times if you want - so long as you don’t keep going after the click.

Speaking of which, anytime I do wheels, I go back and check after about 500 miles or so. (And you still just stop at the click).

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [February 9, 2024, 4:11am UTC](https://community.cartalk.com/t/wheel-studs-breaking-off/194318/69 "2024-02-09T04:11:48Z")

</div>

> **[Using A Torque Wrench Can Prevent Comebacks](https://www.brakeandfrontend.com/using-a-torque-wrench-can-prevent-comebacks/)**
>
> It's not difficult to torque wheel fasteners properly, but it's not difficult to foul up the job, either. We're not using double talk here; we're shootin' straight from the hip. The easy part of proper wheel fastener torquing is knowing the vehicle...

Tester

---

<div class="post-metadata">

**Author:** ![shanonia](https://avatars.discourse-cdn.com/v4/letter/s/9de053/32.png) [@shanonia](https://community.cartalk.com/u/shanonia)\
**Post date:** [February 9, 2024, 4:22am UTC](https://community.cartalk.com/t/wheel-studs-breaking-off/194318/70 "2024-02-09T04:22:33Z")

</div>

I go around the car once and click torque them to 60 ft-lb. Then set it to 80 and go around once more, tightening each nut until the wrench again clicks once.

That’s for my Honda Civic. For my Town and Country van, I do 70 first and the final torque (90) the second time around.

---

<div class="post-metadata">

**Author:** ![mdixter](https://avatars.discourse-cdn.com/v4/letter/m/e36b37/32.png) [@mdixter](https://community.cartalk.com/u/mdixter)\
**Post date:** [February 9, 2024, 11:38am UTC](https://community.cartalk.com/t/wheel-studs-breaking-off/194318/71 "2024-02-09T11:38:29Z")

</div>

Steel wheels aren’t the problem; aftermarket rims could be. I once had my snows mounted on aftermarket rims. The seat of the lug nut was not OEM spec, so the rims came with their own nuts and instructions to use only the nuts provided. Using the OEM nuts with the aftermarket rims could cause the wheel not to seat properly breaking the studs.

---

<div class="post-metadata">

**Author:** ![woofcat15\_187418](https://avatars.discourse-cdn.com/v4/letter/w/7ea924/32.png) [@woofcat15\_187418](https://community.cartalk.com/u/woofcat15_187418)\
**Post date:** [February 10, 2024, 3:36pm UTC](https://community.cartalk.com/t/wheel-studs-breaking-off/194318/72 "2024-02-10T15:36:02Z")

</div>

As the other fellow mentioned, I am suprised that you didn’t hear them banging around. I buy my tires at Costco and take them back for warranty repairs.  
On each of their invoices they mark " Return in so many miles for retorquing."  
Sometimes I do snd other times I use my torque wrench.  
So maybe leave the wheel covers off and retorque.  
Road salt should not affect hardened steel.

---

<div class="post-metadata">

**Author:** ![Jerome-Silverman](https://avatars.discourse-cdn.com/v4/letter/j/71e660/32.png) [@Jerome-Silverman](https://community.cartalk.com/u/Jerome-Silverman)\
**Post date:** [February 11, 2024, 3:07am UTC](https://community.cartalk.com/t/wheel-studs-breaking-off/194318/73 "2024-02-11T03:07:30Z")

</div>

I have replaced a couple of splined studs that go in from the back of the faceplate, without too much difficulty, but the screw-in type, broken off, could be rather difficult.

---

<div class="post-metadata">

**Author:** ![nofyfb\_180405](https://avatars.discourse-cdn.com/v4/letter/n/22d042/32.png) [@nofyfb\_180405](https://community.cartalk.com/u/nofyfb_180405)\
**Post date:** [February 19, 2024, 3:46pm UTC](https://community.cartalk.com/t/wheel-studs-breaking-off/194318/74 "2024-02-19T15:46:58Z")

</div>

I always go through all studs the second time to make sure I didn’t miss any, and they NEVER spin more. Granted, all my vehicles are Toyotas. In your case, it seams like the studs are soft and stretch.

[Previous page](https://community.cartalk.com/t/wheel-studs-breaking-off/194318.md?page=3)
