# Whats wrong with my camry :(

**URL:** <https://community.cartalk.com/t/whats-wrong-with-my-camry/107301>\
**Category:** Maintenance/Repairs\
**Tags:** camry, toyota\
**Created:** [August 28, 2017, 12:32am UTC](https://community.cartalk.com/t/whats-wrong-with-my-camry/107301 "2017-08-28T00:32:49Z")\
**Posts on this page:** 6\
**Page:** 2

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [September 3, 2017, 10:37pm UTC](https://community.cartalk.com/t/whats-wrong-with-my-camry/107301/21 "2017-09-03T22:37:13Z")

</div>

> [@carloszermeno1](#):
>
> it was o2 sensor and knock sensor, can this be causing power loss and egg smell?

Diagnostic codes aren’t specific to what the problem is, only that the computer has noticed a problem with the sensor. A clogged cat can certainly cause loss of power, esp during heavy acceleration and unusual odors from the exhaust system.

---

<div class="post-metadata">

**Author:** ![carloszermeno1](https://avatars.discourse-cdn.com/v4/letter/c/7feea3/32.png) [@carloszermeno1](https://community.cartalk.com/u/carloszermeno1)\
**Post date:** [September 4, 2017, 8:40pm UTC](https://community.cartalk.com/t/whats-wrong-with-my-camry/107301/22 "2017-09-04T20:40:51Z")

</div>

Haven’t fixed it yet but that did work, i floored it when i started and the car had power again like befor

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [September 5, 2017, 11:15pm UTC](https://community.cartalk.com/t/whats-wrong-with-my-camry/107301/23 "2017-09-05T23:15:11Z")

</div>

The purge valve remains a suspect then. Good for you for doing the experiment.

---

<div class="post-metadata">

**Author:** ![carloszermeno1](https://avatars.discourse-cdn.com/v4/letter/c/7feea3/32.png) [@carloszermeno1](https://community.cartalk.com/u/carloszermeno1)\
**Post date:** [September 6, 2017, 9:23am UTC](https://community.cartalk.com/t/whats-wrong-with-my-camry/107301/24 "2017-09-06T09:23:50Z")

</div>

Could it also be the gas pump? I pumped full gas today and he car ran like it perfectly used to😂 Felt like a ferrari again

---

<div class="post-metadata">

**Author:** ![insightful](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/insightful/32/2732_2.png) [@insightful](https://community.cartalk.com/u/insightful)\
**Post date:** [September 6, 2017, 8:39pm UTC](https://community.cartalk.com/t/whats-wrong-with-my-camry/107301/25 "2017-09-06T20:39:48Z")

</div>

> [@carloszermeno1](#):
>
> Could it also be the gas pump? I pumped full gas today and he car ran like it perfectly used to

It’s possible…you’ll know over the coming days.

---

<div class="post-metadata">

**Author:** ![Markwnjr](https://avatars.discourse-cdn.com/v4/letter/m/58956e/32.png) [@Markwnjr](https://community.cartalk.com/u/Markwnjr)\
**Post date:** [September 8, 2017, 1:08am UTC](https://community.cartalk.com/t/whats-wrong-with-my-camry/107301/26 "2017-09-08T01:08:49Z")

</div>

“P0420 - Catalyst efficiency below threshold” - this code alone "9/10"ends up being a faulty Catalytic converter. The technician will monitor live data from  
the oxygen sensors in the exhaust and determine if there is a fault in those sensors that may prevent the Catalyst from operating normal. Do you have any exhaust leaks?

“P0420” Combined with:

“P0328 - Knock sensor circuit high input” - would really have me convinced you have a faulty Catalyst. This code illuminates when your engines air/ fuel mixture is rich or lean, which causes less than satisfactory combustion and this is what the sensor picks up on.

These codes, combined with a rough start, loss of power, loss of MPG, and mileage of vehicle would really point to a faulty catalytic converter.

Side note: the 1MZ V6 i have found is actually much less common than the 3MZ V6. Interference or not, even if the timing belt skipped 1 tooth, the car would be nearly undrivable. 2 or more teeth and it wouldn’t run or turn over.

[Previous page](https://community.cartalk.com/t/whats-wrong-with-my-camry/107301.md?page=1)
