# What next? Rotors

**URL:** <https://community.cartalk.com/t/what-next-rotors/73294>\
**Category:** Maintenance/Repairs\
**Tags:** hyundai, elantra\
**Created:** [June 29, 2012, 10:18pm UTC](https://community.cartalk.com/t/what-next-rotors/73294 "2012-06-29T22:18:18Z")\
**Posts on this page:** 2\
**Page:** 2

<div class="post-metadata">

**Author:** ![keith](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/keith/32/5518_2.png) [@keith](https://community.cartalk.com/u/keith)\
**Post date:** [July 1, 2012, 12:34am UTC](https://community.cartalk.com/t/what-next-rotors/73294/21 "2012-07-01T00:34:42Z")

</div>

My next go to ( I don’t have a large three jaw puller, but I wish I did) is to wedge two large prybars, or even 2x4’s, between the rotor and the steering knuckle. It will come off then, unless its still screwed down. I saw a guy do this to a Honda rotor once, not knowing that they were blind bolted to the hub. He got it off, but the hub was broken into several pieces.

---

<div class="post-metadata">

**Author:** ![keith](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/keith/32/5518_2.png) [@keith](https://community.cartalk.com/u/keith)\
**Post date:** [July 1, 2012, 12:38am UTC](https://community.cartalk.com/t/what-next-rotors/73294/22 "2012-07-01T00:38:05Z")

</div>

Correction, blind bolted to the wheel bearing, which is part of the hub, anyway he had bought new wheel bearing assemblies so he was lucky.

[Previous page](https://community.cartalk.com/t/what-next-rotors/73294.md?page=1)