# Voyager windshield wipers bushing

**URL:** <https://community.cartalk.com/t/voyager-windshield-wipers-bushing/783>\
**Category:** Maintenance/Repairs\
**Created:** [June 21, 2007, 12:42am UTC](https://community.cartalk.com/t/voyager-windshield-wipers-bushing/783 "2007-06-21T00:42:23Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![jackrabbit](https://avatars.discourse-cdn.com/v4/letter/j/9fc348/32.png) [@jackrabbit](https://community.cartalk.com/u/jackrabbit)\
**Post date:** [June 21, 2007, 12:42am UTC](https://community.cartalk.com/t/voyager-windshield-wipers-bushing/783/1 "2007-06-21T00:42:23Z")

</div>

The nylon bushing wore out in my 1989 Voyager windshield wipers. Got a replacement bushing from the dealer, but how in the world do I get it into the space? The diameter on each side is larger than the hole it goes into and it has a squared off piece to slide into a little slot to keep it in place. How do I get the bushing pressed into something that is smaller than its outer diameter? I can see it will fit at its “equator.”

---

<div class="post-metadata">

**Author:** ![Roadrunner](https://avatars.discourse-cdn.com/v4/letter/r/d2c977/32.png) [@Roadrunner](https://community.cartalk.com/u/Roadrunner)\
**Post date:** [June 21, 2007, 2:16am UTC](https://community.cartalk.com/t/voyager-windshield-wipers-bushing/783/2 "2007-06-21T02:16:45Z")

</div>

Perhaps they gave you the wrong bushing.

If the right one is no longer in stock you may have to have that one machined to fit or maybe visit a recycle yard.

---

<div class="post-metadata">

**Author:** ![pleasedodgevan](https://avatars.discourse-cdn.com/v4/letter/p/51bf81/32.png) [@pleasedodgevan](https://community.cartalk.com/u/pleasedodgevan)\
**Post date:** [June 21, 2007, 4:50am UTC](https://community.cartalk.com/t/voyager-windshield-wipers-bushing/783/3 "2007-06-21T04:50:11Z")

</div>

Have you removed the component from the vehicle yet? It may go in from the other side.

---

<div class="post-metadata">

**Author:** ![jackrabbit](https://avatars.discourse-cdn.com/v4/letter/j/9fc348/32.png) [@jackrabbit](https://community.cartalk.com/u/jackrabbit)\
**Post date:** [June 21, 2007, 4:27pm UTC](https://community.cartalk.com/t/voyager-windshield-wipers-bushing/783/4 "2007-06-21T16:27:59Z")

</div>

Yes, the old one is off. No, the problem is not which side it goes into. There is a groove on the bushing that matches the diameter of the hole it fits into. Go look at a bushing. They are bigger on either side of the groove. How do you press it in to fit?
