# Voltage problems Isuzu rodeo

**URL:** <https://community.cartalk.com/t/voltage-problems-isuzu-rodeo/150379>\
**Category:** Maintenance/Repairs\
**Created:** [October 9, 2019, 5:48pm UTC](https://community.cartalk.com/t/voltage-problems-isuzu-rodeo/150379 "2019-10-09T17:48:47Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Daniel\_Guin](https://avatars.discourse-cdn.com/v4/letter/d/f4b2a3/32.png) [@Daniel\_Guin](https://community.cartalk.com/u/Daniel_Guin)\
**Post date:** [October 9, 2019, 5:48pm UTC](https://community.cartalk.com/t/voltage-problems-isuzu-rodeo/150379/1 "2019-10-09T17:48:47Z")

</div>

2 plugs one is a cigarette plug the other is aux plug. I keep a 100 w inverter plugged into the cig plug until it quit. Voltmeter says 0 fuse is good. So I plugged inverter into aux plug. It quit so I tested it and the aux plug shows 75 volts. That’s the problem how is there voltage so high? Ran an aftermarket plug direct from battery and it shows 13.9 average. I just can’t figure out how I’m getting 75 on my aux plug…!

 ![IMG_20191009_093944_01](https://global.discourse-cdn.com/cartalk/original/3X/8/8/881a06e1700645a7c24a16c1792852a28a0fa511.jpeg)

---

<div class="post-metadata">

**Author:** ![Rod-Knox](https://avatars.discourse-cdn.com/v4/letter/r/a183cd/32.png) [@Rod-Knox](https://community.cartalk.com/u/Rod-Knox)\
**Post date:** [October 9, 2019, 6:13pm UTC](https://community.cartalk.com/t/voltage-problems-isuzu-rodeo/150379/2 "2019-10-09T18:13:29Z")

</div>

Maybe if you look again you’ll see a decimal point mixed in the ‘75’ reading somewhere.

---

<div class="post-metadata">

**Author:** ![tcmichnorth](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tcmichnorth/32/25126_2.png) [@tcmichnorth](https://community.cartalk.com/u/tcmichnorth)\
**Post date:** [October 9, 2019, 6:19pm UTC](https://community.cartalk.com/t/voltage-problems-isuzu-rodeo/150379/3 "2019-10-09T18:19:53Z")

</div>

Could be voltmeter is on wrong scale, or as mentioned overlooked decimal or ghost readings.

---

<div class="post-metadata">

**Author:** ![Rod-Knox](https://avatars.discourse-cdn.com/v4/letter/r/a183cd/32.png) [@Rod-Knox](https://community.cartalk.com/u/Rod-Knox)\
**Post date:** [October 9, 2019, 8:27pm UTC](https://community.cartalk.com/t/voltage-problems-isuzu-rodeo/150379/4 "2019-10-09T20:27:14Z")

</div>

Doesn’t that screen indicate 74.6 milli volts? It does indicate it’s running on AUTO RANGING.

---

<div class="post-metadata">

**Author:** ![vipergg](https://avatars.discourse-cdn.com/v4/letter/v/50afbb/32.png) [@vipergg](https://community.cartalk.com/u/vipergg)\
**Post date:** [October 9, 2019, 11:21pm UTC](https://community.cartalk.com/t/voltage-problems-isuzu-rodeo/150379/5 "2019-10-09T23:21:14Z")

</div>

Right that says millivolts , so basically you are getting little to nothing out of that plug .
