# Vibrate on highway

**URL:** <https://community.cartalk.com/t/vibrate-on-highway/12479>\
**Category:** Maintenance/Repairs\
**Created:** [April 2, 2008, 4:31am UTC](https://community.cartalk.com/t/vibrate-on-highway/12479 "2008-04-02T04:31:56Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![richardcao](https://avatars.discourse-cdn.com/v4/letter/r/edb3f5/32.png) [@richardcao](https://community.cartalk.com/u/richardcao)\
**Post date:** [April 2, 2008, 4:31am UTC](https://community.cartalk.com/t/vibrate-on-highway/12479/1 "2008-04-02T04:31:56Z")

</div>

Hi, there  
  
 I have a Sienna Toyota van (Year 2000). It was all fine and ran well on freeway. A couple of months ago, I got grinding noise when I apply the brake. So I took it to a mechanics shop, “Firestone Complete Auto Care Store”. They found quite a few problems with the brake system. As a result, the rotors, drums, brake pads, braks shoes and calipers are all replaced. After that service, whenever I drive the van on freeway, I got bad vibration whenever I drove it to about 65 MPH. I took it back to the same shop. They did alignment, balance and rotate the tires. Still, I got the same bad vibration. Last weekends, following the shop’s suggestion, I had them replaced all four tires. Well, after that, I still got the same bad vibration. Seems to be the shop ran out of ideas.  
  
  
  
 What it could be wrong?  
  
  
  
 Thank you very much.  
  
  
  
 Xuelong