# V50 turn & whine

**URL:** <https://community.cartalk.com/t/v50-turn-whine/68985>\
**Category:** Maintenance/Repairs\
**Tags:** v50, volvo\
**Created:** [October 27, 2011, 5:30am UTC](https://community.cartalk.com/t/v50-turn-whine/68985 "2011-10-27T05:30:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![vIssues](https://avatars.discourse-cdn.com/v4/letter/v/3e96dc/32.png) [@vIssues](https://community.cartalk.com/u/vIssues)\
**Post date:** [October 27, 2011, 5:30am UTC](https://community.cartalk.com/t/v50-turn-whine/68985/1 "2011-10-27T05:30:23Z")

</div>

(3-7sec mark & 19-21sec, most notable)

Low speed. As the vehicle decelerates or accelerates and is turning, a whine is emitted from , I think, the left front. It is intermittent, and today was not quite as loud as it usually gets. Any ideas? Guessing I should look for some rust build up. Volvo V50, 82000mi, 2005

---

<div class="post-metadata">

**Author:** ![UncleTurbo](https://avatars.discourse-cdn.com/v4/letter/u/e9a140/32.png) [@UncleTurbo](https://community.cartalk.com/u/UncleTurbo)\
**Post date:** [October 27, 2011, 2:27pm UTC](https://community.cartalk.com/t/v50-turn-whine/68985/2 "2011-10-27T14:27:48Z")

</div>

Things like CV joints and wheel bearings get worn out at about 82K on a Volvo. I doubt this as simple as some rust build up. Sounds like a bad wheel bearing, this is most likely to me.