# Turn + Hazard signals don't blink **URL:** \ **Category:** Maintenance/Repairs\ **Created:** [July 31, 2014, 6:41am UTC](https://community.cartalk.com/t/turn-hazard-signals-dont-blink/86318 "2014-07-31T06:41:11Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![xaml](https://avatars.discourse-cdn.com/v4/letter/x/2bfe46/32.png) [@xaml](https://community.cartalk.com/u/xaml)\ **Post date:** [July 31, 2014, 6:41am UTC](https://community.cartalk.com/t/turn-hazard-signals-dont-blink/86318/1 "2014-07-31T06:41:11Z")
Car is 2000 Corolla with 58k miles. Today, I had my hazard signals on while parked when suddenly…they stopped blinking. The signal lights in the dash just stay on…they do not blink. I also verified that both front and rear lights also turns on…it just doesn’t blink. The corolla has a fuse box under the hood in the drivers side. Here is the schematic for the fusebox: [http://toyotafuseboxdiagrams.blogspot.com/2012/10/fuse-box-toyota-2000-corolla-ce.html](http://toyotafuseboxdiagrams.blogspot.com/2012/10/fuse-box-toyota-2000-corolla-ce.html) From what little I know about mechanics/electricity, can I just pull the wiper fuse and put it into the turn signal fuse while I wait for a new fuse? Do I need to disconnect the battery? Can someone confirm this is the part I’m suppose to install: [http://www.rockauto.com/catalog/moreinfo.php?pk=932674&cc=1432903](http://www.rockauto.com/catalog/moreinfo.php?pk=932674&cc=1432903) ---
**Author:** ![wesw](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/wesw/32/2713_2.png) [@wesw](https://community.cartalk.com/u/wesw)\ **Post date:** [July 31, 2014, 6:46am UTC](https://community.cartalk.com/t/turn-hazard-signals-dont-blink/86318/2 "2014-07-31T06:46:21Z")
in my vehicle there is a little flasher module under the dash that make the lights blink. yours may be the same setup. I don t think the fuse is the problem. just replace the flasher module, I can t remember the proper name. you can prob just manually operate blinker until you pick one up. I think they just plug in ---
**Author:** ![Yosemite](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/yosemite/32/643_2.png) [@Yosemite](https://community.cartalk.com/u/Yosemite)\ **Post date:** [July 31, 2014, 5:16pm UTC](https://community.cartalk.com/t/turn-hazard-signals-dont-blink/86318/3 "2014-07-31T17:16:08Z")
@Wesw; is probably right and thats your problem. If you go to the auto parts store and buy a new one, then you will know cwhat to look for under the dash. It may not be the same color, or it may be a little shorter/longer, but if it plugs in…you’ve got the right part. But check the fuse and if it is blown, you can swap that fuse until you get a new one. Yosemite ---
**Author:** ![xaml](https://avatars.discourse-cdn.com/v4/letter/x/2bfe46/32.png) [@xaml](https://community.cartalk.com/u/xaml)\ **Post date:** [July 31, 2014, 7:04pm UTC](https://community.cartalk.com/t/turn-hazard-signals-dont-blink/86318/4 "2014-07-31T19:04:23Z")
Can someone verify this is the part I need: [http://www.autozone.com/autozone/parts/Duralast-Relay-Turn-Signal/2000-Toyota-Corolla/](http://www.autozone.com/autozone/parts/Duralast-Relay-Turn-Signal/2000-Toyota-Corolla/)_/N-jem01Z9cj93?itemIdentifier=221841\_0\_0_ Autozone also has these parts: > **[Accessories for Cars, Trucks & SUVs](https://www.autozone.com/accessories?filterByKeyWord=flasher&fromString=search)** > > Shop for Accessories with confidence at AutoZone. Order yours online today and pick up in store. Great customer service and trustworthy advice. Not sure which part exactly I need. What is the difference between “Relay - Turn Signal” and “Flasher”? ---
**Author:** ![Nevada\_545](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/nevada_545/32/41232_2.png) [@Nevada\_545](https://community.cartalk.com/u/Nevada_545)\ **Post date:** [July 31, 2014, 10:09pm UTC](https://community.cartalk.com/t/turn-hazard-signals-dont-blink/86318/5 "2014-07-31T22:09:55Z")
Without circuit testing no one can tell what needs to be repaired or replaced. If you wish to try a new flasher remove the old one from the drivers side J/B and take it with you to the parts store to verify it matches the one in the parts stores catalog. ---
**Author:** ![wesw](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/wesw/32/2713_2.png) [@wesw](https://community.cartalk.com/u/wesw)\ **Post date:** [August 1, 2014, 5:06am UTC](https://community.cartalk.com/t/turn-hazard-signals-dont-blink/86318/6 "2014-08-01T05:06:28Z")
should be the flasher since the lights work, they just don t flash.