# TTY Bolts

**URL:** <https://community.cartalk.com/t/tty-bolts/91711>\
**Category:** Maintenance/Repairs\
**Created:** [November 15, 2015, 9:26pm UTC](https://community.cartalk.com/t/tty-bolts/91711 "2015-11-15T21:26:25Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sloepoke](https://avatars.discourse-cdn.com/v4/letter/s/da6949/32.png) [@Sloepoke](https://community.cartalk.com/u/Sloepoke)\
**Post date:** [November 15, 2015, 9:26pm UTC](https://community.cartalk.com/t/tty-bolts/91711/1 "2015-11-15T21:26:25Z")

</div>

I’ve been all over the internet & can’t seem to find the answer to a question . 2005 Jeep Liberty 3.7 V6 engine . It seems the head bolts & connecting rod bolts are TTY . Any other bolts in this engine TTY ?

---

<div class="post-metadata">

**Author:** ![asemaster](https://avatars.discourse-cdn.com/v4/letter/a/5f9b8f/32.png) [@asemaster](https://community.cartalk.com/u/asemaster)\
**Post date:** [November 15, 2015, 9:29pm UTC](https://community.cartalk.com/t/tty-bolts/91711/2 "2015-11-15T21:29:18Z")

</div>

Like which bolts?

The answer can be found in your torque specifications. Any bolt requiring torque of “X plus 45%” or whatever is a torque to yield bolt.

---

<div class="post-metadata">

**Author:** ![Sloepoke](https://avatars.discourse-cdn.com/v4/letter/s/da6949/32.png) [@Sloepoke](https://community.cartalk.com/u/Sloepoke)\
**Post date:** [November 15, 2015, 9:51pm UTC](https://community.cartalk.com/t/tty-bolts/91711/3 "2015-11-15T21:51:40Z")

</div>

Thanks , got it . Learn something new every day . I’ve seen the bolt torque specs. that say x lbs + x degrees . Didn’t know those type specs. pertained to TTY bolts . Bedplate / main bearing bolts was the ones I was most concerned about . Thanks again .