# Transmission **URL:** \ **Category:** Maintenance/Repairs\ **Created:** [February 17, 2008, 1:49pm UTC](https://community.cartalk.com/t/transmission/10769 "2008-02-17T13:49:40Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![beane31](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/beane31/32/3029_2.png) [@beane31](https://community.cartalk.com/u/beane31)\ **Post date:** [February 17, 2008, 1:49pm UTC](https://community.cartalk.com/t/transmission/10769/1 "2008-02-17T13:49:40Z")
i cant seem to get my transmission to come out i have already pulled out all of hte bolts and starter, hoses wires etc. it is about 4 inches away from the motor but just wont let go. it is a 97 blazer ---
**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\ **Post date:** [February 17, 2008, 3:11pm UTC](https://community.cartalk.com/t/transmission/10769/2 "2008-02-17T15:11:37Z")
Did you remove the torque converter to flex plate hardware? Tester ---
**Author:** ![beane31](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/beane31/32/3029_2.png) [@beane31](https://community.cartalk.com/u/beane31)\ **Post date:** [February 17, 2008, 4:08pm UTC](https://community.cartalk.com/t/transmission/10769/3 "2008-02-17T16:08:46Z")
not sure what youre asking. how? and where do i get to this i can see the fly wheel and torque converter! ---
**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\ **Post date:** [February 17, 2008, 4:38pm UTC](https://community.cartalk.com/t/transmission/10769/4 "2008-02-17T16:38:56Z")
There’s a sheet metal cover in front of the transmission below the engine. Remove this cover and it’ll give access to the torque converter to flex plate mounting hardware. Tester