# That one time SeaFoam actually worked

**URL:** <https://community.cartalk.com/t/that-one-time-seafoam-actually-worked/128288>\
**Category:** Maintenance/Repairs\
**Created:** [November 5, 2018, 8:32pm UTC](https://community.cartalk.com/t/that-one-time-seafoam-actually-worked/128288 "2018-11-05T20:32:35Z")\
**Posts on this page:** 17\
**Page:** 2

<div class="post-metadata">

**Author:** ![keith](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/keith/32/5518_2.png) [@keith](https://community.cartalk.com/u/keith)\
**Post date:** [November 6, 2018, 4:27am UTC](https://community.cartalk.com/t/that-one-time-seafoam-actually-worked/128288/21 "2018-11-06T04:27:49Z")

</div>

It got the stuck wheel off my tiller. I think that wheel has been on there since it was manufactured in 1977.

---

<div class="post-metadata">

**Author:** ![oldtimer-11](https://avatars.discourse-cdn.com/v4/letter/o/e79b87/32.png) [@oldtimer-11](https://community.cartalk.com/u/oldtimer-11)\
**Post date:** [November 6, 2018, 5:26am UTC](https://community.cartalk.com/t/that-one-time-seafoam-actually-worked/128288/22 "2018-11-06T05:26:17Z")

</div>

Maybe I will try it on my Scotts/JD rider, it has no brakes and I have not been able to get the right rear wheel off. PB Blaster and a wheel puller have not been able to move it. It’s not much of a problem because I am the only one that operates it. It did make it harder to change the tire.

I have had good luck with small engines just using some carb cleaner in the tank.

---

<div class="post-metadata">

**Author:** ![shawn\_kearney](https://avatars.discourse-cdn.com/v4/letter/s/22d042/32.png) [@shawn\_kearney](https://community.cartalk.com/u/shawn_kearney)\
**Post date:** [November 6, 2018, 10:27am UTC](https://community.cartalk.com/t/that-one-time-seafoam-actually-worked/128288/23 "2018-11-06T10:27:10Z")

</div>

Something with the fuel system was my impression of the problem, also.

I guess that this kind of treatment can work, I’m just pretty skeptical that a quart of additive would have much one-time affect when diluted in 20 gallons of gas (hence why I added it to a nearly empty tank).

But, I’m a computer programmer, not a chemical engineer.

---

<div class="post-metadata">

**Author:** ![Purebred](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/purebred/32/46796_2.png) [@Purebred](https://community.cartalk.com/u/Purebred)\
**Post date:** [November 6, 2018, 10:29am UTC](https://community.cartalk.com/t/that-one-time-seafoam-actually-worked/128288/24 "2018-11-06T10:29:43Z")

</div>

Thank you, I wondered about the names. I do add it to my outboards fuel in as much as the ethanol free gas may not have the detergent adatives.

---

<div class="post-metadata">

**Author:** ![shadowfax](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/shadowfax/32/13026_2.png) [@shadowfax](https://community.cartalk.com/u/shadowfax)\
**Post date:** [November 6, 2018, 3:49pm UTC](https://community.cartalk.com/t/that-one-time-seafoam-actually-worked/128288/25 "2018-11-06T15:49:00Z")

</div>

> [@oldtimer-11](#):
>
> Maybe I will try it on my Scotts/JD rider, it has no brakes and I have not been able to get the right rear wheel off.

Have you tried 50/50 acetone and ATF combined with a big ol’ rubber hammer? That stuff has yet to fail me, even getting rusted bolts off of an upper midwest car.

---

<div class="post-metadata">

**Author:** ![oldtimer-11](https://avatars.discourse-cdn.com/v4/letter/o/e79b87/32.png) [@oldtimer-11](https://community.cartalk.com/u/oldtimer-11)\
**Post date:** [November 6, 2018, 8:03pm UTC](https://community.cartalk.com/t/that-one-time-seafoam-actually-worked/128288/26 "2018-11-06T20:03:04Z")

</div>

No, I tried PB Blaster, a 4lb hand sledge, and a wheel puller. Since I live near Buffalo NY I am very familiar with rust.

---

<div class="post-metadata">

**Author:** ![bing](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/bing/32/4619_2.png) [@bing](https://community.cartalk.com/u/bing)\
**Post date:** [November 6, 2018, 10:26pm UTC](https://community.cartalk.com/t/that-one-time-seafoam-actually-worked/128288/27 "2018-11-06T22:26:31Z")

</div>

If I remember right, Taryl has a youtube on it somewhere. Heat the hub up and use wax to melt in the axle. Use or make a wheel puller like I did. Once it’s off, put a little anti-seize on it. I was planning on doing a trans overhaul so made sure I could get the wheels off first, then had a tire get punctured so glad I could get it off.

---

<div class="post-metadata">

**Author:** ![keith](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/keith/32/5518_2.png) [@keith](https://community.cartalk.com/u/keith)\
**Post date:** [November 6, 2018, 11:01pm UTC](https://community.cartalk.com/t/that-one-time-seafoam-actually-worked/128288/28 "2018-11-06T23:01:12Z")

</div>

> [@oldtimer-11](#):
>
> No, I tried PB Blaster, a 4lb hand sledge, and a wheel puller.

More or less what I did, except I used Seafoam Deep Creep. Using the sledge turned out to be a big mistake as it knocked loose a retainer and damaged all the thrust washers. I drilled three holes through the wheel near the hub and used a steering wheel puller. Sprayed on the Deep Creep and put tension on the puller and left overnight. Came loose three days later.

Troy Bilt Horse tiller mfg Nov 77. New thrust washers and retainers on order.

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [November 7, 2018, 2:39am UTC](https://community.cartalk.com/t/that-one-time-seafoam-actually-worked/128288/29 "2018-11-07T02:39:31Z")

</div>

> [@shadowfax](#):
>
> Have you tried 50/50 acetone and ATF

I’ve had good luck w/that combination for penetrating and rust-bond breaker oil too. Usually when I make a batch it is equal portions of acetone, ATF, and WD 40. The reason is I tend to have plenty of the last two, but always seem to be low on acetone. I’ve made it 50/50 acetone and ATF also, didn’t notice much difference in performance. I think it is the acetone that is what does the rust-breaking job and the ATF is just acting as a light weight oil that moves the acetone along to where it is needed. I use Mercon 5.

---

<div class="post-metadata">

**Author:** ![oldtimer-11](https://avatars.discourse-cdn.com/v4/letter/o/e79b87/32.png) [@oldtimer-11](https://community.cartalk.com/u/oldtimer-11)\
**Post date:** [November 7, 2018, 5:36am UTC](https://community.cartalk.com/t/that-one-time-seafoam-actually-worked/128288/30 "2018-11-07T05:36:09Z")

</div>

My tractor wheels already had holes for a wheel puller. I sprayed PB blaster on for a week. put tension on it with the puller, tapped the wheel outward and the axle inward and kept tightening the puller. Succeeded only in bending the wheel, decided I didn’t need brakes all that badly anyway.

---

<div class="post-metadata">

**Author:** ![TwinTurbo](https://avatars.discourse-cdn.com/v4/letter/t/8baadc/32.png) [@TwinTurbo](https://community.cartalk.com/u/TwinTurbo)\
**Post date:** [November 7, 2018, 2:56pm UTC](https://community.cartalk.com/t/that-one-time-seafoam-actually-worked/128288/31 "2018-11-07T14:56:26Z")

</div>

> [@oldtimer-11](#):
>
> decided I didn’t need brakes all that badly anyway

BTDT. A man has to know when to concede a battle not worth winning 😄

---

<div class="post-metadata">

**Author:** ![cwatkin](https://avatars.discourse-cdn.com/v4/letter/c/59ef9b/32.png) [@cwatkin](https://community.cartalk.com/u/cwatkin)\
**Post date:** [November 7, 2018, 3:26pm UTC](https://community.cartalk.com/t/that-one-time-seafoam-actually-worked/128288/32 "2018-11-07T15:26:58Z")

</div>

I have used SF and think it has its uses. It will clean out a dirty intake nicely by dissolving crud. I have used it in the oil to clean out neglected engines as well. It can also act as a fuel injector cleaner.

The one issue is if the car is REALLY neglected, you can break loose too much stuff at once and plug injectors or oil passages. I have never had this happen but have heard from people who have had that happen. They add SF to a sludged engine and suddenly more problems appear.

Yeah, this isn’t a miracle product but has its uses in some cases.

---

<div class="post-metadata">

**Author:** ![Mikedrives](https://avatars.discourse-cdn.com/v4/letter/m/13edae/32.png) [@Mikedrives](https://community.cartalk.com/u/Mikedrives)\
**Post date:** [November 8, 2018, 6:55pm UTC](https://community.cartalk.com/t/that-one-time-seafoam-actually-worked/128288/33 "2018-11-08T18:55:42Z")

</div>

I shoulda read the fine print. I was hoping it would fix my headlights.

---

<div class="post-metadata">

**Author:** ![bing](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/bing/32/4619_2.png) [@bing](https://community.cartalk.com/u/bing)\
**Post date:** [November 8, 2018, 8:25pm UTC](https://community.cartalk.com/t/that-one-time-seafoam-actually-worked/128288/34 "2018-11-08T20:25:16Z")

</div>

Yeah i’ve been putting off waxing the cars for winter. Maybe I’ll just add Seafoam instead.

---

<div class="post-metadata">

**Author:** ![Purebred](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/purebred/32/46796_2.png) [@Purebred](https://community.cartalk.com/u/Purebred)\
**Post date:** [November 8, 2018, 9:00pm UTC](https://community.cartalk.com/t/that-one-time-seafoam-actually-worked/128288/35 "2018-11-08T21:00:50Z")

</div>

SeaFoam instead of Green Slime in my tires?

---

<div class="post-metadata">

**Author:** ![Scrapyard-John](https://avatars.discourse-cdn.com/v4/letter/s/f6c823/32.png) [@Scrapyard-John](https://community.cartalk.com/u/Scrapyard-John)\
**Post date:** [November 9, 2018, 12:11am UTC](https://community.cartalk.com/t/that-one-time-seafoam-actually-worked/128288/36 "2018-11-09T00:11:58Z")

</div>

I used sea foam to free a sticking lifter in a $450 (scrap price at the time) truck. I’d never used it before. I went looking for a “miracle in a can” oil additive that specifically said it could free a stuck lifter. Not something I’d normally do, but I didn’t have much to lose. I’m pretty sure it mentioned stuck lifters on the back of the can. I poured it in the engine oil in the Wal Mart parking lot with the engine idling (and ticking). Slowly, the ticking disappeared. I was pretty surprised it worked. A little transmission fluid in the oil worked just as well, so I just used that from then on.

---

<div class="post-metadata">

**Author:** ![shawn\_kearney](https://avatars.discourse-cdn.com/v4/letter/s/22d042/32.png) [@shawn\_kearney](https://community.cartalk.com/u/shawn_kearney)\
**Post date:** [December 7, 2018, 3:43pm UTC](https://community.cartalk.com/t/that-one-time-seafoam-actually-worked/128288/37 "2018-12-07T15:43:42Z")

</div>

Acceleration is still smooth and responsive. Oddly my tires balanced themselves, too!

[Previous page](https://community.cartalk.com/t/that-one-time-seafoam-actually-worked/128288.md?page=1)
