# Tacoma Clutch

**URL:** <https://community.cartalk.com/t/tacoma-clutch/28101>\
**Category:** Maintenance/Repairs\
**Created:** [March 21, 2009, 9:56pm UTC](https://community.cartalk.com/t/tacoma-clutch/28101 "2009-03-21T21:56:05Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Johnb](https://avatars.discourse-cdn.com/v4/letter/j/4491bb/32.png) [@Johnb](https://community.cartalk.com/u/Johnb)\
**Post date:** [March 21, 2009, 9:56pm UTC](https://community.cartalk.com/t/tacoma-clutch/28101/1 "2009-03-21T21:56:05Z")

</div>

Clutch is not disengaging on 96 Toy. Tacoma  
  
 . Have replaced slave cylinder and bled. When clutch pedal is depressed it does not come back up, in fact it is “sucked” all the way down to the floor and must be pulled back up. Is the master cylinder bad?

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [March 21, 2009, 11:01pm UTC](https://community.cartalk.com/t/tacoma-clutch/28101/2 "2009-03-21T23:01:31Z")

</div>

Could be.

Take a look up under the dash where the clutch pedal rod passes through the firewall, and see if hydraulic fluid is running down the inside of the firewall from the master cylinder.

Tester

---

<div class="post-metadata">

**Author:** ![Johnb](https://avatars.discourse-cdn.com/v4/letter/j/4491bb/32.png) [@Johnb](https://community.cartalk.com/u/Johnb)\
**Post date:** [March 23, 2009, 12:10am UTC](https://community.cartalk.com/t/tacoma-clutch/28101/3 "2009-03-23T00:10:13Z")

</div>

Thanks! Will check it out!