# Subaru Legacy 98 GT

**URL:** <https://community.cartalk.com/t/subaru-legacy-98-gt/27484>\
**Category:** Maintenance/Repairs\
**Created:** [March 8, 2009, 8:31pm UTC](https://community.cartalk.com/t/subaru-legacy-98-gt/27484 "2009-03-08T20:31:16Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![subby23](https://avatars.discourse-cdn.com/v4/letter/s/65b543/32.png) [@subby23](https://community.cartalk.com/u/subby23)\
**Post date:** [March 8, 2009, 8:31pm UTC](https://community.cartalk.com/t/subaru-legacy-98-gt/27484/1 "2009-03-08T20:31:16Z")

</div>

Hi,  
  
  
  
 When I shift from 1st to 2nd, especially on a hill, I get an extreme vibration. All other gears are ok. Replaced clutch, tie rods, axle, ect.  
  
  
  
 Can anyone let me know what they think is going on.

---

<div class="post-metadata">

**Author:** ![cigroller](https://avatars.discourse-cdn.com/v4/letter/c/c68b51/32.png) [@cigroller](https://community.cartalk.com/u/cigroller)\
**Post date:** [March 9, 2009, 12:53am UTC](https://community.cartalk.com/t/subaru-legacy-98-gt/27484/2 "2009-03-09T00:53:43Z")

</div>

Have you checked / replaced any engine/transmission mounts?

What the flywheel properly dealt with when the clutch was replaced?

---

<div class="post-metadata">

**Author:** ![subby23](https://avatars.discourse-cdn.com/v4/letter/s/65b543/32.png) [@subby23](https://community.cartalk.com/u/subby23)\
**Post date:** [March 10, 2009, 12:42am UTC](https://community.cartalk.com/t/subaru-legacy-98-gt/27484/3 "2009-03-10T00:42:26Z")

</div>

Thanks so much for getting back to me. I have not replaced the engine/transmission mounts. I know the clutch was replaced but in terms of the flywheel, I will need to check to see if it was properly dealt with (I think it was not done). Do you know the costs of these items.

Thanks!