# Stuck trying to remove camber adjust bolt on rear lower control arm

**URL:** <https://community.cartalk.com/t/stuck-trying-to-remove-camber-adjust-bolt-on-rear-lower-control-arm/148138>\
**Category:** Maintenance/Repairs\
**Created:** [September 4, 2019, 11:00pm UTC](https://community.cartalk.com/t/stuck-trying-to-remove-camber-adjust-bolt-on-rear-lower-control-arm/148138 "2019-09-04T23:00:19Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Stephen\_Rice](https://avatars.discourse-cdn.com/v4/letter/s/b5e925/32.png) [@Stephen\_Rice](https://community.cartalk.com/u/Stephen_Rice)\
**Post date:** [September 4, 2019, 11:00pm UTC](https://community.cartalk.com/t/stuck-trying-to-remove-camber-adjust-bolt-on-rear-lower-control-arm/148138/1 "2019-09-04T23:00:19Z")

</div>

I’m very stuck in replacing my rear lower support arm because I cannot figure out how to remove the camber adjust bolt and also the stud next to it, both are froze inside of the bushings and are putting my project at a standstill (upload://57SGnvsCFrLgPbdfR21rC9waGa8.jpeg)

---

<div class="post-metadata">

**Author:** ![Mustangman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mustangman/32/44130_2.png) [@Mustangman](https://community.cartalk.com/u/Mustangman)\
**Post date:** [September 4, 2019, 11:54pm UTC](https://community.cartalk.com/t/stuck-trying-to-remove-camber-adjust-bolt-on-rear-lower-control-arm/148138/2 "2019-09-04T23:54:49Z")

</div>

Your picture doesn’t seem to have loaded.

It would really help the quality of answers if you told us what kind of car you are working on, what bolt you are trying to remove and tell us if it is stuck because of rust or if you just don’t know how it comes loose.

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [September 5, 2019, 2:46am UTC](https://community.cartalk.com/t/stuck-trying-to-remove-camber-adjust-bolt-on-rear-lower-control-arm/148138/3 "2019-09-05T02:46:31Z")

</div>

Take a look at the link below. Is your configuration similar to this? If so then removing the bolt is probably just a matter of applying some rust-dissolving penetrant on the threads letting it sit overnight.

Here’s how to remove a stud from a threaded hole

> **[How to Remove a threaded stud from a threaded hole](https://home-building.wonderhowto.com/how-to/remove-threaded-stud-from-threaded-hole-338014/)**
>
> Ultimate Handyman demonstrates how to remove a threaded stud from a threaded hole. You will often find threaded studs when you are doing car repair. First, remove the nut from the stud. Then, spray it with lubricant. Next, screw the nut back on the...