# Stalling 2016 Nissan Murano

**URL:** <https://community.cartalk.com/t/stalling-2016-nissan-murano/143930>\
**Category:** Maintenance/Repairs\
**Tags:** nissan, murano\
**Created:** [July 8, 2019, 7:24pm UTC](https://community.cartalk.com/t/stalling-2016-nissan-murano/143930 "2019-07-08T19:24:37Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![SylviaFrank](https://avatars.discourse-cdn.com/v4/letter/s/c89c15/32.png) [@SylviaFrank](https://community.cartalk.com/u/SylviaFrank)\
**Post date:** [July 8, 2019, 7:24pm UTC](https://community.cartalk.com/t/stalling-2016-nissan-murano/143930/1 "2019-07-08T19:24:37Z")

</div>

My 2006 Nissan Murano will jerk and comes to a hault in the middle of the road, but will crank up immediatey. Camshaft has been replaced three times.

---

<div class="post-metadata">

**Author:** ![Mustangman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mustangman/32/44130_2.png) [@Mustangman](https://community.cartalk.com/u/Mustangman)\
**Post date:** [July 8, 2019, 7:26pm UTC](https://community.cartalk.com/t/stalling-2016-nissan-murano/143930/2 "2019-07-08T19:26:24Z")

</div>

Since you didn’t aska question, I will. Is your check engine light on? Are you sure a camshaft was replaced? Or was it a camshaft sensor?

---

<div class="post-metadata">

**Author:** ![SylviaFrank](https://avatars.discourse-cdn.com/v4/letter/s/c89c15/32.png) [@SylviaFrank](https://community.cartalk.com/u/SylviaFrank)\
**Post date:** [July 8, 2019, 7:28pm UTC](https://community.cartalk.com/t/stalling-2016-nissan-murano/143930/3 "2019-07-08T19:28:56Z")

</div>

Yes, the check engine light is on. It was the camshaft sensor that was replaced. When I take to autozone it is still showing that a camshaft sensor is needed.

Sylvia

---

<div class="post-metadata">

**Author:** ![VOLVO-V70](https://avatars.discourse-cdn.com/v4/letter/v/8e8cbc/32.png) [@VOLVO-V70](https://community.cartalk.com/u/VOLVO-V70)\
**Post date:** [July 8, 2019, 8:16pm UTC](https://community.cartalk.com/t/stalling-2016-nissan-murano/143930/4 "2019-07-08T20:16:27Z")

</div>

Sylvia , using your work place email puts a lot of info on an open wed site that your employer might not approve of.

---

<div class="post-metadata">

**Author:** ![It\_s-Me](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/it_s-me/32/12660_2.png) [@It\_s-Me](https://community.cartalk.com/u/It_s-Me)\
**Post date:** [July 8, 2019, 8:39pm UTC](https://community.cartalk.com/t/stalling-2016-nissan-murano/143930/5 "2019-07-08T20:39:09Z")

</div>

> [@SylviaFrank](#):
>
> When I take to autozone it is still showing that a camshaft sensor is needed.

No it’s not,

What it’s telling you is that the camshaft sensor has detected a problem,  
If we new what the code # was, we might be able to help  
Code # will be a “P” followed by 4 numbers, P0000

---

<div class="post-metadata">

**Author:** ![Mustangman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mustangman/32/44130_2.png) [@Mustangman](https://community.cartalk.com/u/Mustangman)\
**Post date:** [July 8, 2019, 8:48pm UTC](https://community.cartalk.com/t/stalling-2016-nissan-murano/143930/6 "2019-07-08T20:48:48Z")

</div>

Seems these sensors are an issue with Nissans. They can cause the car to stall and the restart. Replacing one or both if they’ve failed again is the first step. Sorry you have to do it a 4th time but, well, weak point.