# Speed bumps and shock absorbers (a guy thing)

**URL:** <https://community.cartalk.com/t/speed-bumps-and-shock-absorbers-a-guy-thing/103709>\
**Category:** General Discussion\
**Created:** [May 7, 2017, 6:59pm UTC](https://community.cartalk.com/t/speed-bumps-and-shock-absorbers-a-guy-thing/103709 "2017-05-07T18:59:26Z")\
**Posts on this page:** 18\
**Page:** 1

<div class="post-metadata">

**Author:** ![jlatorre](https://avatars.discourse-cdn.com/v4/letter/j/958977/32.png) [@jlatorre](https://community.cartalk.com/u/jlatorre)\
**Post date:** [May 7, 2017, 6:59pm UTC](https://community.cartalk.com/t/speed-bumps-and-shock-absorbers-a-guy-thing/103709/1 "2017-05-07T18:59:26Z")

</div>

Here’s a question that Tom and Ray might have loved. Maybe it’s a guy thing.

A lot of the speed bumps in our town are segmented … they don’t go all the way across the road, but leave a gap so that one side of the car (usually the passenger side) hits the bumps while the other doesn’t. While riding in a car with a friend of mine, I noticed that he would always aim it so that the driver’s side would go through the gap. He claimed that this extended the life of the shock absorbers, because half the car wouldn’t “feel the bump.”

I got to thinking that this might be BOGUS, because it would transfer all the shock of the car to the shock absorbers on the passenger side, causing them to wear out faster. And since you always replace shocks in pairs, you end up changing the shocks more frequently rather than less frequently.

Who’s right?

---

<div class="post-metadata">

**Author:** ![Mustangman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mustangman/32/44130_2.png) [@Mustangman](https://community.cartalk.com/u/Mustangman)\
**Post date:** [May 7, 2017, 9:12pm UTC](https://community.cartalk.com/t/speed-bumps-and-shock-absorbers-a-guy-thing/103709/2 "2017-05-07T21:12:08Z")

</div>

He’s aiming at the gap so HE won’t feel the bump as much but YOU will. He’s just trying to justify his comfort and your DIScomfort.

The “saving the shocks” thing is pretty much BO-GUS says a former shock absorber and suspension design engineer.

BTW, I do it too… because I don’t want to feel the bump.

---

<div class="post-metadata">

**Author:** ![insightful](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/insightful/32/2732_2.png) [@insightful](https://community.cartalk.com/u/insightful)\
**Post date:** [May 8, 2017, 12:11am UTC](https://community.cartalk.com/t/speed-bumps-and-shock-absorbers-a-guy-thing/103709/3 "2017-05-08T00:11:40Z")

</div>

Best would be to alternate sides through the “gap.”

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [May 8, 2017, 12:31am UTC](https://community.cartalk.com/t/speed-bumps-and-shock-absorbers-a-guy-thing/103709/4 "2017-05-08T00:31:35Z")

</div>

I don’t see it hurting the passenger side shock any more than when driving over the bump on both sides. And it might reduce wear and tear somewhat on the driver’s side shock and suspension. But like you say, if the passengerside develops a shock or suspension problem, whatever part that gets replaced is usually replaced on the driver’s side in any event at the same time. So practically speaking, I’m thinking the idea is mostly bogus.

Going slower over the bump is where to focus if reducing wear and tear on the car is the objective.

---

<div class="post-metadata">

**Author:** ![B.L.E](https://avatars.discourse-cdn.com/v4/letter/b/848f3c/32.png) [@B.L.E](https://community.cartalk.com/u/B.L.E)\
**Post date:** [May 8, 2017, 1:56am UTC](https://community.cartalk.com/t/speed-bumps-and-shock-absorbers-a-guy-thing/103709/5 "2017-05-08T01:56:09Z")

</div>

Ahh, the joys of riding a motorcycle!!

---

<div class="post-metadata">

**Author:** ![thegreendrag0n](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/thegreendrag0n/32/9265_2.png) [@thegreendrag0n](https://community.cartalk.com/u/thegreendrag0n)\
**Post date:** [May 8, 2017, 2:12am UTC](https://community.cartalk.com/t/speed-bumps-and-shock-absorbers-a-guy-thing/103709/6 "2017-05-08T02:12:05Z")

</div>

hitting speed bump with one wheel definitely gets less momentum transferred to the body, so I can imagine why one would try hitting it with one wheel only (doing it myself when it does not look awkward), but it is unlikely something about making for less wear, it is more of comfort issue 🙂

---

<div class="post-metadata">

**Author:** ![galant](https://avatars.discourse-cdn.com/v4/letter/g/77aa72/32.png) [@galant](https://community.cartalk.com/u/galant)\
**Post date:** [May 8, 2017, 3:05am UTC](https://community.cartalk.com/t/speed-bumps-and-shock-absorbers-a-guy-thing/103709/7 "2017-05-08T03:05:52Z")

</div>

I have been wondering about this too. When you hit it with one side only, the body twists more and might not be the best.

Now you have something new to worry about.

---

<div class="post-metadata">

**Author:** ![thegreendrag0n](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/thegreendrag0n/32/9265_2.png) [@thegreendrag0n](https://community.cartalk.com/u/thegreendrag0n)\
**Post date:** [May 8, 2017, 3:23am UTC](https://community.cartalk.com/t/speed-bumps-and-shock-absorbers-a-guy-thing/103709/8 "2017-05-08T03:23:20Z")

</div>

consider a roll bar effect: when you hit it with one wheel, it works to reduce body movement as another side did not get similar movement, but if you hit it with both wheels, roll bar can not compensate it and you have full force of bump transferred to the body

---

<div class="post-metadata">

**Author:** ![pleasedodgevan2](https://avatars.discourse-cdn.com/v4/letter/p/ad7895/32.png) [@pleasedodgevan2](https://community.cartalk.com/u/pleasedodgevan2)\
**Post date:** [May 8, 2017, 5:16am UTC](https://community.cartalk.com/t/speed-bumps-and-shock-absorbers-a-guy-thing/103709/9 "2017-05-08T05:16:59Z")

</div>

The “save the sway bar society” will hear about this. Malfoy.

---

<div class="post-metadata">

**Author:** ![jtsanders](https://avatars.discourse-cdn.com/v4/letter/j/c2a13f/32.png) [@jtsanders](https://community.cartalk.com/u/jtsanders)\
**Post date:** [May 8, 2017, 11:21am UTC](https://community.cartalk.com/t/speed-bumps-and-shock-absorbers-a-guy-thing/103709/10 "2017-05-08T11:21:59Z")

</div>

If you rollover the speed hump at or below the speed limit, It will not damage the suspension, but it seems like significantly higher speeds could damage the suspension. I slow down to 15 to 20 in a 25 zone when I roll over speed humps and still have the original shocks at 184,000 miles.

---

<div class="post-metadata">

**Author:** ![bing](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/bing/32/4619_2.png) [@bing](https://community.cartalk.com/u/bing)\
**Post date:** [May 8, 2017, 6:01pm UTC](https://community.cartalk.com/t/speed-bumps-and-shock-absorbers-a-guy-thing/103709/11 "2017-05-08T18:01:10Z")

</div>

I went over one slowly at a strip mall in a neighboring town that I was unfamiliar with. It was such a severe bump the car bounced and the trailer hitch scraped on the speed bump. I really hate those thing and try to avoid them entirely. I think these were designed by people that hate cars.

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [May 8, 2017, 10:55pm UTC](https://community.cartalk.com/t/speed-bumps-and-shock-absorbers-a-guy-thing/103709/12 "2017-05-08T22:55:21Z")

</div>

> [@bing](#):
>
> I think these were designed by people that hate cars

And people with pricey cars seem to really hate the speed bumps. A gym-friend who I had known for years and years one summer decided to take a holiday to Germany, and while there she bought a new BMW right from the factory, drove it around Germany for a week, then shipped it back to California. She was so concerned about the gym parking lot speed bump’s affect on her new car’s suspensions system she had to find a new gym, haven’t seen her since …lol

---

<div class="post-metadata">

**Author:** ![Nevada\_545](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/nevada_545/32/41232_2.png) [@Nevada\_545](https://community.cartalk.com/u/Nevada_545)\
**Post date:** [May 9, 2017, 4:55am UTC](https://community.cartalk.com/t/speed-bumps-and-shock-absorbers-a-guy-thing/103709/13 "2017-05-09T04:55:57Z")

</div>

> [@GeorgeSanJose](#):
>
> A gym-friend who I had known for years and years one summer decided to take a holiday to Germany, and while there she bought a new BMW right from the factory, drove it around Germany for a week, then shipped it back to California.

It seems to be very difficult if not impossible to register a grey market vehicle in California.

---

<div class="post-metadata">

**Author:** ![jtsanders](https://avatars.discourse-cdn.com/v4/letter/j/c2a13f/32.png) [@jtsanders](https://community.cartalk.com/u/jtsanders)\
**Post date:** [May 9, 2017, 1:54pm UTC](https://community.cartalk.com/t/speed-bumps-and-shock-absorbers-a-guy-thing/103709/14 "2017-05-09T13:54:51Z")

</div>

I imagine that she could have bought a US spec car in Europe and then shipped it back. Only the SAVs are built in Spartanburg.

---

<div class="post-metadata">

**Author:** ![insightful](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/insightful/32/2732_2.png) [@insightful](https://community.cartalk.com/u/insightful)\
**Post date:** [May 9, 2017, 5:34pm UTC](https://community.cartalk.com/t/speed-bumps-and-shock-absorbers-a-guy-thing/103709/15 "2017-05-09T17:34:08Z")

</div>

> [@jtsanders](#):
>
> Only the SAVs are built in Spartanburg.

I recommend stopping at the museum next to the plant:

[https://www.bmwusfactory.com/zentrum/general-information/zentrum-information/](https://www.bmwusfactory.com/zentrum/general-information/zentrum-information/)

---

<div class="post-metadata">

**Author:** ![VOLVO-V70](https://avatars.discourse-cdn.com/v4/letter/v/8e8cbc/32.png) [@VOLVO-V70](https://community.cartalk.com/u/VOLVO-V70)\
**Post date:** [May 9, 2017, 7:02pm UTC](https://community.cartalk.com/t/speed-bumps-and-shock-absorbers-a-guy-thing/103709/16 "2017-05-09T19:02:27Z")

</div>

> [@jtsanders](#):
>
> Only the SAVs are built in Spartanburg.

What is a " SAV " ?

Taking my own advice I did the Google thing. SAV = Sport Activity Vehicle ( Not meant for use as a off road or towing vehicle ) Sounds like BMW marketing speak.

---

<div class="post-metadata">

**Author:** ![jtsanders](https://avatars.discourse-cdn.com/v4/letter/j/c2a13f/32.png) [@jtsanders](https://community.cartalk.com/u/jtsanders)\
**Post date:** [May 10, 2017, 12:28am UTC](https://community.cartalk.com/t/speed-bumps-and-shock-absorbers-a-guy-thing/103709/17 "2017-05-10T00:28:49Z")

</div>

Your right. I was parroting BMWs differentiation of their SUVs by calling them SAVs. Since we are talking about BMWs,it seems legitimate to call them by BMWs name.

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [May 10, 2017, 12:47am UTC](https://community.cartalk.com/t/speed-bumps-and-shock-absorbers-a-guy-thing/103709/18 "2017-05-10T00:47:16Z")

</div>

> [@Nevada\_545](#):
>
> It seems to be very difficult if not impossible to register a grey market vehicle in California.

I expect she used the BMW-USA sponsored European Delivery Program.
