# Signal

**URL:** <https://community.cartalk.com/t/signal/15815>\
**Category:** Maintenance/Repairs\
**Created:** [June 25, 2008, 1:07am UTC](https://community.cartalk.com/t/signal/15815 "2008-06-25T01:07:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![nickr1932](https://avatars.discourse-cdn.com/v4/letter/n/258eb7/32.png) [@nickr1932](https://community.cartalk.com/u/nickr1932)\
**Post date:** [June 25, 2008, 1:07am UTC](https://community.cartalk.com/t/signal/15815/1 "2008-06-25T01:07:21Z")

</div>

86 Ford , 302. Where does the signal come from that tells the fuel pump relay to send power to the fuel pump?

---

<div class="post-metadata">

**Author:** ![BustedKnuckles](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/bustedknuckles/32/25_2.png) [@BustedKnuckles](https://community.cartalk.com/u/BustedKnuckles)\
**Post date:** [June 25, 2008, 1:21am UTC](https://community.cartalk.com/t/signal/15815/2 "2008-06-25T01:21:41Z")

</div>

The ECM. But, it goes through an ‘impact detector’ that is like a circuit breaker, only a sharp hit will make it pop. This is a small black box behind the seats that has a white reset button on top.

---

<div class="post-metadata">

**Author:** ![mcparadise](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mcparadise/32/32_2.png) [@mcparadise](https://community.cartalk.com/u/mcparadise)\
**Post date:** [June 25, 2008, 1:24am UTC](https://community.cartalk.com/t/signal/15815/3 "2008-06-25T01:24:55Z")

</div>

Initially from the battery, through the ignition switch and the emergency cut-off switch (also known as the inertia switch, meant to shut off fuel flow in case of a crash). There is a fuse in the circuit, somewhere, too.

Start at the beginning, and follow the circuit. A service manual (Haynes or Ford factory) would probably help quite a bit. Try [Books4Cars.com](http://Books4Cars.com) for an inexpensive used manual.
