# Rust on an engine block

**URL:** <https://community.cartalk.com/t/rust-on-an-engine-block/79149>\
**Category:** Maintenance/Repairs\
**Tags:** wrangler, jeep\
**Created:** [May 6, 2013, 5:54pm UTC](https://community.cartalk.com/t/rust-on-an-engine-block/79149 "2013-05-06T17:54:26Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![TMC](https://avatars.discourse-cdn.com/v4/letter/t/e5b9ba/32.png) [@TMC](https://community.cartalk.com/u/TMC)\
**Post date:** [May 6, 2013, 5:54pm UTC](https://community.cartalk.com/t/rust-on-an-engine-block/79149/1 "2013-05-06T17:54:26Z")

</div>

I recently purchased a 2004 Jeep wrangler Sahara. In retrospect, I probably should have inspected it more closely. The underside, including the sides of the engine block (below the heads, etc.) have a lot of rust. With little effort I can flake off pieces as thick as a quarter for example. Can anyone tell me how concerned I should be and what I need to do???

---

<div class="post-metadata">

**Author:** ![texases](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/texases/32/862_2.png) [@texases](https://community.cartalk.com/u/texases)\
**Post date:** [May 6, 2013, 6:00pm UTC](https://community.cartalk.com/t/rust-on-an-engine-block/79149/2 "2013-05-06T18:00:54Z")

</div>

I’d be much more concerned about the frame and brake/fuel lines rusting through. I’ve not heard of rust damaging a block. The freeze out plugs sometimes corrode, but that’s usually from the inside.

---

<div class="post-metadata">

**Author:** ![TMC](https://avatars.discourse-cdn.com/v4/letter/t/e5b9ba/32.png) [@TMC](https://community.cartalk.com/u/TMC)\
**Post date:** [May 6, 2013, 6:42pm UTC](https://community.cartalk.com/t/rust-on-an-engine-block/79149/3 "2013-05-06T18:42:53Z")

</div>

Thanks, texases

---

<div class="post-metadata">

**Author:** ![MikeInNH](https://avatars.discourse-cdn.com/v4/letter/m/a587f6/32.png) [@MikeInNH](https://community.cartalk.com/u/MikeInNH)\
**Post date:** [May 6, 2013, 7:57pm UTC](https://community.cartalk.com/t/rust-on-an-engine-block/79149/4 "2013-05-06T19:57:53Z")

</div>

It’ll take several decades for the rust to be any concern. This is not sheet metal. It’s inches thick of cast Iron. I’ve seen engine blocks sit outside in a junk yard in the North East…and then someone comes along and buys it and plops it in their vehicle.

---

<div class="post-metadata">

**Author:** ![TMC](https://avatars.discourse-cdn.com/v4/letter/t/e5b9ba/32.png) [@TMC](https://community.cartalk.com/u/TMC)\
**Post date:** [May 6, 2013, 8:49pm UTC](https://community.cartalk.com/t/rust-on-an-engine-block/79149/5 "2013-05-06T20:49:23Z")

</div>

Thanks

---

<div class="post-metadata">

**Author:** ![gbeckwith](https://avatars.discourse-cdn.com/v4/letter/g/e495f1/32.png) [@gbeckwith](https://community.cartalk.com/u/gbeckwith)\
**Post date:** [May 8, 2013, 9:31am UTC](https://community.cartalk.com/t/rust-on-an-engine-block/79149/6 "2013-05-08T09:31:30Z")

</div>

Rust and no oil? I’d be thankful! At that age there isn’t a whole lot that could’ve rusted through with normal use. If there’s no sign of offroad abuse (dinged skid plate, dented fuel tank, etc.) you shouldn’t be concerned.
