# Rumble when accelerating above 40 mph 95 tacoma manual transmission **URL:** \ **Category:** General Discussion\ **Created:** [January 22, 2020, 6:35pm UTC](https://community.cartalk.com/t/rumble-when-accelerating-above-40-mph-95-tacoma-manual-transmission/157045 "2020-01-22T18:35:32Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![bskeen01\_162424](https://avatars.discourse-cdn.com/v4/letter/b/9de0a6/32.png) [@bskeen01\_162424](https://community.cartalk.com/u/bskeen01_162424)\ **Post date:** [January 22, 2020, 6:35pm UTC](https://community.cartalk.com/t/rumble-when-accelerating-above-40-mph-95-tacoma-manual-transmission/157045/1 "2020-01-22T18:35:32Z")
I have a 95 Tacoma, 4wd manual transmission that rumbles - I think up front - when I accelerate at around 40 mph and above. It gets quieter where I coast, or press in the clutch. Anybody have any ideas what it could be? ---
**Author:** ![tcmichnorth](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tcmichnorth/32/25126_2.png) [@tcmichnorth](https://community.cartalk.com/u/tcmichnorth)\ **Post date:** [January 22, 2020, 6:38pm UTC](https://community.cartalk.com/t/rumble-when-accelerating-above-40-mph-95-tacoma-manual-transmission/157045/2 "2020-01-22T18:38:49Z")
Misfiring spark plugs is a pretty good reason. ---
**Author:** ![bskeen01\_162424](https://avatars.discourse-cdn.com/v4/letter/b/9de0a6/32.png) [@bskeen01\_162424](https://community.cartalk.com/u/bskeen01_162424)\ **Post date:** [January 22, 2020, 6:44pm UTC](https://community.cartalk.com/t/rumble-when-accelerating-above-40-mph-95-tacoma-manual-transmission/157045/3 "2020-01-22T18:44:00Z")
Hmmm… might be; I recently replaced my spark plugs and wires - about a month ago. I’ve also replaced my front springs and struts, rear shocks and leaf springs at that time. I greased my driveshaft a couple of weeks ago too. (I must love being under my truck) Could it also be an alignment or wheel balance issue? ---
**Author:** ![Purebred](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/purebred/32/46796_2.png) [@Purebred](https://community.cartalk.com/u/Purebred)\ **Post date:** [January 22, 2020, 7:27pm UTC](https://community.cartalk.com/t/rumble-when-accelerating-above-40-mph-95-tacoma-manual-transmission/157045/4 "2020-01-22T19:27:54Z")
Yes, try rotating tires front to back. If no change, problem with the front end. ---
**Author:** ![bskeen01\_162424](https://avatars.discourse-cdn.com/v4/letter/b/9de0a6/32.png) [@bskeen01\_162424](https://community.cartalk.com/u/bskeen01_162424)\ **Post date:** [January 22, 2020, 7:55pm UTC](https://community.cartalk.com/t/rumble-when-accelerating-above-40-mph-95-tacoma-manual-transmission/157045/5 "2020-01-22T19:55:19Z")
I’ll try that. I also changed the front and rear differential fluid as well as the transmission fluid and transfer case fluid. It’s got about 350k miles, and probably about that much more left in her 🙂 … ---
**Author:** ![Scrapyard-John](https://avatars.discourse-cdn.com/v4/letter/s/f6c823/32.png) [@Scrapyard-John](https://community.cartalk.com/u/Scrapyard-John)\ **Post date:** [January 22, 2020, 9:43pm UTC](https://community.cartalk.com/t/rumble-when-accelerating-above-40-mph-95-tacoma-manual-transmission/157045/6 "2020-01-22T21:43:39Z")
You said you greased the driveshafts. Did you notice any play in the rear u-joints? I’ve had failing rear u-joints show up as a vibration at speed. Check front CV joints also. Couldn’t be too mad at Toyota if any of those failed at 350k. Read your post again. Is the rumble just a noise, or have any vibration to go along with it? ---
**Author:** ![bskeen01\_162424](https://avatars.discourse-cdn.com/v4/letter/b/9de0a6/32.png) [@bskeen01\_162424](https://community.cartalk.com/u/bskeen01_162424)\ **Post date:** [January 22, 2020, 9:48pm UTC](https://community.cartalk.com/t/rumble-when-accelerating-above-40-mph-95-tacoma-manual-transmission/157045/7 "2020-01-22T21:48:21Z")
Thanks John. I didn’t notice play in the rear u-joint when I greased them, but good idea! I’ll check it out. Thanks! ---
**Author:** ![Scrapyard-John](https://avatars.discourse-cdn.com/v4/letter/s/f6c823/32.png) [@Scrapyard-John](https://community.cartalk.com/u/Scrapyard-John)\ **Post date:** [January 22, 2020, 9:52pm UTC](https://community.cartalk.com/t/rumble-when-accelerating-above-40-mph-95-tacoma-manual-transmission/157045/8 "2020-01-22T21:52:18Z")
Don’t forget the cv joints in the front. They’re still turning in 2wd, although they’re not pulling. If they’ve got a lot of play, they could vibrate. If they are worn enough to vibrate, I think they’d probably click and pop when turning in 4wd. ---
**Author:** ![bskeen01\_162424](https://avatars.discourse-cdn.com/v4/letter/b/9de0a6/32.png) [@bskeen01\_162424](https://community.cartalk.com/u/bskeen01_162424)\ **Post date:** [January 22, 2020, 9:53pm UTC](https://community.cartalk.com/t/rumble-when-accelerating-above-40-mph-95-tacoma-manual-transmission/157045/9 "2020-01-22T21:53:36Z")
Yep, THANKS!!! ---
**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\ **Post date:** [January 23, 2020, 2:10am UTC](https://community.cartalk.com/t/rumble-when-accelerating-above-40-mph-95-tacoma-manual-transmission/157045/10 "2020-01-23T02:10:05Z")
If this is happening in 2wd mode everything from the transfer case output to the front wheels seems unlikely given the clutch/coasting relationship. My guess is either problematic manual transmission bearings or rear differential problem. Check the fluids. The other thing that came to my mind is the crankshaft thrust bearing. ---
**Author:** ![bskeen01\_162424](https://avatars.discourse-cdn.com/v4/letter/b/9de0a6/32.png) [@bskeen01\_162424](https://community.cartalk.com/u/bskeen01_162424)\ **Post date:** [January 23, 2020, 6:25am UTC](https://community.cartalk.com/t/rumble-when-accelerating-above-40-mph-95-tacoma-manual-transmission/157045/11 "2020-01-23T06:25:59Z")
Thanks, I will. ---
**Author:** ![Blakensnake](https://avatars.discourse-cdn.com/v4/letter/b/6bbea6/32.png) [@Blakensnake](https://community.cartalk.com/u/Blakensnake)\ **Post date:** [January 23, 2020, 2:40pm UTC](https://community.cartalk.com/t/rumble-when-accelerating-above-40-mph-95-tacoma-manual-transmission/157045/12 "2020-01-23T14:40:10Z")
Road to 700k miles x) ---
**Author:** ![Blakensnake](https://avatars.discourse-cdn.com/v4/letter/b/6bbea6/32.png) [@Blakensnake](https://community.cartalk.com/u/Blakensnake)\ **Post date:** [January 23, 2020, 8:16pm UTC](https://community.cartalk.com/t/rumble-when-accelerating-above-40-mph-95-tacoma-manual-transmission/157045/13 "2020-01-23T20:16:24Z")
Wrong thread ---
**Author:** ![bskeen01\_162424](https://avatars.discourse-cdn.com/v4/letter/b/9de0a6/32.png) [@bskeen01\_162424](https://community.cartalk.com/u/bskeen01_162424)\ **Post date:** [March 3, 2021, 4:12pm UTC](https://community.cartalk.com/t/rumble-when-accelerating-above-40-mph-95-tacoma-manual-transmission/157045/14 "2021-03-03T16:12:27Z")
In the end, it was a bad ignition coil on cylinder 3, as well as a completely shot center bering in the drive line, topped with a slightly bent rim. ---
**Author:** ![thegreendrag0n](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/thegreendrag0n/32/9265_2.png) [@thegreendrag0n](https://community.cartalk.com/u/thegreendrag0n)\ **Post date:** [March 3, 2021, 5:18pm UTC](https://community.cartalk.com/t/rumble-when-accelerating-above-40-mph-95-tacoma-manual-transmission/157045/15 "2021-03-03T17:18:08Z")
good for another 350k miles now? 🙂 ---
**Author:** ![wentwest](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/wentwest/32/6073_2.png) [@wentwest](https://community.cartalk.com/u/wentwest)\ **Post date:** [March 3, 2021, 6:02pm UTC](https://community.cartalk.com/t/rumble-when-accelerating-above-40-mph-95-tacoma-manual-transmission/157045/16 "2021-03-03T18:02:16Z")
My little “like” symbol is what we can do in a forum, but I want to say, out loud, that I REALLY appreciate when someone comes back and tells the rest of us what solved the problem. Your contribution to our knowledge is worth recognizing.