# Replacemet of a starter for 1996 Acura TL

**URL:** <https://community.cartalk.com/t/replacemet-of-a-starter-for-1996-acura-tl/31992>\
**Category:** Maintenance/Repairs\
**Created:** [June 17, 2009, 7:20pm UTC](https://community.cartalk.com/t/replacemet-of-a-starter-for-1996-acura-tl/31992 "2009-06-17T19:20:38Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![SMITTYDAWG44](https://avatars.discourse-cdn.com/v4/letter/s/22d042/32.png) [@SMITTYDAWG44](https://community.cartalk.com/u/SMITTYDAWG44)\
**Post date:** [June 17, 2009, 7:20pm UTC](https://community.cartalk.com/t/replacemet-of-a-starter-for-1996-acura-tl/31992/1 "2009-06-17T19:20:38Z")

</div>

How do i get to the top bolt from the bottom of this car

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [June 17, 2009, 9:07pm UTC](https://community.cartalk.com/t/replacemet-of-a-starter-for-1996-acura-tl/31992/2 "2009-06-17T21:07:18Z")

</div>

You may have to remove the tire, and then through the wheel well use a loooooong extension.

Tester

---

<div class="post-metadata">

**Author:** ![SMITTYDAWG44](https://avatars.discourse-cdn.com/v4/letter/s/22d042/32.png) [@SMITTYDAWG44](https://community.cartalk.com/u/SMITTYDAWG44)\
**Post date:** [June 18, 2009, 1:19pm UTC](https://community.cartalk.com/t/replacemet-of-a-starter-for-1996-acura-tl/31992/3 "2009-06-18T13:19:59Z")

</div>

Thank you very much, I did remove the tire and had to remove the drive shaft and it came straight out. Again thank you.