# Removing fuse block from a 2001 mercury sable

**URL:** <https://community.cartalk.com/t/removing-fuse-block-from-a-2001-mercury-sable/84471>\
**Category:** Maintenance/Repairs\
**Tags:** mercury, sable\
**Created:** [April 5, 2014, 2:05am UTC](https://community.cartalk.com/t/removing-fuse-block-from-a-2001-mercury-sable/84471 "2014-04-05T02:05:38Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![crowomega](https://avatars.discourse-cdn.com/v4/letter/c/c6cbf5/32.png) [@crowomega](https://community.cartalk.com/u/crowomega)\
**Post date:** [April 5, 2014, 2:05am UTC](https://community.cartalk.com/t/removing-fuse-block-from-a-2001-mercury-sable/84471/1 "2014-04-05T02:05:38Z")

</div>

i need to replace the gem unit, I am told. but i can’t seem to figure out how to drop the block to access the module. i only see the 1 bolt which fastens tto the floor. and after removing that, the block will not drop down. any help would be appreciated

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [April 5, 2014, 2:46am UTC](https://community.cartalk.com/t/removing-fuse-block-from-a-2001-mercury-sable/84471/2 "2014-04-05T02:46:18Z")

</div>

I looked up the procedure to replace the GEM in your vehicle. And you’re not going to like what it says.

**Caution! Prior to removing the GEM, the necessary program information must be uploaded to a scan tool so it can be downloaded to the replacement GEM.**

Unless you have that capabilty, I’d take it to somebody who does.

Tester

---

<div class="post-metadata">

**Author:** ![knfenimore](https://avatars.discourse-cdn.com/v4/letter/k/9fc348/32.png) [@knfenimore](https://community.cartalk.com/u/knfenimore)\
**Post date:** [April 5, 2014, 7:57pm UTC](https://community.cartalk.com/t/removing-fuse-block-from-a-2001-mercury-sable/84471/3 "2014-04-05T19:57:49Z")

</div>

Did the dealer have a GEM replacement? Also, I found mention of a bad ground for the GEM there at the fuse block. The guy in this link pulled a GEM gor the same model and year and then reprogrammed his key code using the Owner’s Manual.

> **[2001 Sable LE Generic Electronic Module - Taurus Car Club of America : Ford...](http://www.taurusclub.com/forum/117-electronics-security-audio-visual/173153-2001-sable-le-generic-electronic-module.html)**
>
> Taurus Car Club of America : Ford Taurus Forum

---

<div class="post-metadata">

**Author:** ![Caddyman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/caddyman/32/23_2.png) [@Caddyman](https://community.cartalk.com/u/Caddyman)\
**Post date:** [April 5, 2014, 9:08pm UTC](https://community.cartalk.com/t/removing-fuse-block-from-a-2001-mercury-sable/84471/4 "2014-04-05T21:08:51Z")

</div>

Have BCM’s (Body Control Modules) morphed into GEM’s (Generic Control Modules) ??

---

<div class="post-metadata">

**Author:** ![knfenimore](https://avatars.discourse-cdn.com/v4/letter/k/9fc348/32.png) [@knfenimore](https://community.cartalk.com/u/knfenimore)\
**Post date:** [April 5, 2014, 10:12pm UTC](https://community.cartalk.com/t/removing-fuse-block-from-a-2001-mercury-sable/84471/5 "2014-04-05T22:12:40Z")

</div>

I think it’s a Ford thing. They love confusing us with acronyms.

---

<div class="post-metadata">

**Author:** ![db4690](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/db4690/32/2583_2.png) [@db4690](https://community.cartalk.com/u/db4690)\
**Post date:** [April 6, 2014, 12:04am UTC](https://community.cartalk.com/t/removing-fuse-block-from-a-2001-mercury-sable/84471/6 "2014-04-06T00:04:49Z")

</div>

@Caddyman‌

Yup

Ford calls their body control module GEM

Just as Mercedes-Benz calls it SAM Signal and Aquisition Module . . . and there’s usually more than one
