# Ratcheting Adapter for Braker Bar Recommendations

**URL:** <https://community.cartalk.com/t/ratcheting-adapter-for-braker-bar-recommendations/184384>\
**Category:** Maintenance/Repairs\
**Created:** [May 30, 2022, 3:05am UTC](https://community.cartalk.com/t/ratcheting-adapter-for-braker-bar-recommendations/184384 "2022-05-30T03:05:13Z")\
**Posts on this page:** 4\
**Page:** 2

<div class="post-metadata">

**Author:** ![galant](https://avatars.discourse-cdn.com/v4/letter/g/77aa72/32.png) [@galant](https://community.cartalk.com/u/galant)\
**Post date:** [June 1, 2022, 5:47am UTC](https://community.cartalk.com/t/ratcheting-adapter-for-braker-bar-recommendations/184384/21 "2022-06-01T05:47:49Z")

</div>

I have one of those plus lug wrenches @texases has posted. If any shop has worked on the car, I use the breaker bar to loosen it and then with the plus wrench it is easy to spin it off. If I have torqued the lugs on the previous work done, then I can brake it loose with the plus tool.  
The only issue was fishing around for the correct head of the plus wrench but I noticed all my cars use a 19mm, so put masking tape on the base of the 19 mm. If I get to work on another car it is still no biggy.

---

<div class="post-metadata">

**Author:** ![VOLVO-V70](https://avatars.discourse-cdn.com/v4/letter/v/8e8cbc/32.png) [@VOLVO-V70](https://community.cartalk.com/u/VOLVO-V70)\
**Post date:** [June 1, 2022, 12:29pm UTC](https://community.cartalk.com/t/ratcheting-adapter-for-braker-bar-recommendations/184384/22 "2022-06-01T12:29:20Z")

</div>

> [@YoshiMoshi3](#):
>
> How many revolutions of the head or bolt is it consider “loose”?

Seriously , maybe you should just someone do this . If this hard to understand process is too much for you then just let a tire shop rotate the tires if that is what you are doing .

---

<div class="post-metadata">

**Author:** ![bing](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/bing/32/4619_2.png) [@bing](https://community.cartalk.com/u/bing)\
**Post date:** [June 1, 2022, 8:41pm UTC](https://community.cartalk.com/t/ratcheting-adapter-for-braker-bar-recommendations/184384/23 "2022-06-01T20:41:46Z")

</div>

Thanks for reminding me. I bought one of those swivel head 3/8 years ago and forgot I even had it. I think it was for changing spark plugs. I managed to break the stud though and just repaired it with a roll pin so was set aside for light duty work. Got too many now. 3/8 with swivel, with ratchet, without either, and then the torque wrench.

Not the first time I bought a tool forgetting that I already had one. At least I don’t pay the Snap on price. Still looking for my awl though.

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [June 3, 2022, 10:02pm UTC](https://community.cartalk.com/t/ratcheting-adapter-for-braker-bar-recommendations/184384/24 "2022-06-03T22:02:49Z")

</div>

I use a 3/4 inch hefty breaker bar with corresponding socket for removing lug nuts. I’ve never needed a ratcheting version myself. After the lug nut is loosened with the socket oriented 90 degrees to the bar, I’ll orient the socket so it is in a straight-tline with the bar, then I just twist on the end of the bar to finish loosening the nut. For the final tightening I use a beam-type torque wrench, or just do it by feel.

[Previous page](https://community.cartalk.com/t/ratcheting-adapter-for-braker-bar-recommendations/184384.md?page=1)
