# Pulling out a dent **URL:** \ **Category:** Maintenance/Repairs\ **Tags:** f250, ford\ **Created:** [August 16, 2010, 7:07pm UTC](https://community.cartalk.com/t/pulling-out-a-dent/53641 "2010-08-16T19:07:53Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![bogie5](https://avatars.discourse-cdn.com/v4/letter/b/94ad74/32.png) [@bogie5](https://community.cartalk.com/u/bogie5)\ **Post date:** [August 16, 2010, 7:07pm UTC](https://community.cartalk.com/t/pulling-out-a-dent/53641/1 "2010-08-16T19:07:53Z")
I have a dent in the left rear of the box of the truck. It is about foot and half from the tailgate. I tried the plumbers helper the plunger. It didn’t even move it. ---
**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\ **Post date:** [August 16, 2010, 7:20pm UTC](https://community.cartalk.com/t/pulling-out-a-dent/53641/2 "2010-08-16T19:20:44Z")
Depending how deep the dent is, this might work. [http://www.youtube.com/watch?v=ILVWPzO\_swY](http://www.youtube.com/watch?v=ILVWPzO_swY) Tester ---
**Author:** ![lion9car](https://avatars.discourse-cdn.com/v4/letter/l/59ef9b/32.png) [@lion9car](https://community.cartalk.com/u/lion9car)\ **Post date:** [August 16, 2010, 8:03pm UTC](https://community.cartalk.com/t/pulling-out-a-dent/53641/3 "2010-08-16T20:03:53Z")
If there’s no paint damage or creasing, check into one of those paintless dent repair places. I’ve been very satisfied with their results in the past. ---
**Author:** ![texases](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/texases/32/862_2.png) [@texases](https://community.cartalk.com/u/texases)\ **Post date:** [August 16, 2010, 8:10pm UTC](https://community.cartalk.com/t/pulling-out-a-dent/53641/4 "2010-08-16T20:10:03Z")
I saw another video like that, except a small block of CO2 (GLOVES, PLEASE!) was used to cool the dent.