# Power window repair / 04 GMC Canyon

**URL:** <https://community.cartalk.com/t/power-window-repair-04-gmc-canyon/19681>\
**Category:** Maintenance/Repairs\
**Created:** [September 17, 2008, 11:59am UTC](https://community.cartalk.com/t/power-window-repair-04-gmc-canyon/19681 "2008-09-17T11:59:24Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![keller1951](https://avatars.discourse-cdn.com/v4/letter/k/8c91f0/32.png) [@keller1951](https://community.cartalk.com/u/keller1951)\
**Post date:** [September 17, 2008, 11:59am UTC](https://community.cartalk.com/t/power-window-repair-04-gmc-canyon/19681/1 "2008-09-17T11:59:24Z")

</div>

Power window on Drivers side bangs when it comes to the end of the closing or opening if I don’t release the switch right away. I want to take panel off and repair myself, if possible. What’s the procedure to fix?

---

<div class="post-metadata">

**Author:** ![oldschool](https://avatars.discourse-cdn.com/v4/letter/o/e19adc/32.png) [@oldschool](https://community.cartalk.com/u/oldschool)\
**Post date:** [September 17, 2008, 7:02pm UTC](https://community.cartalk.com/t/power-window-repair-04-gmc-canyon/19681/2 "2008-09-17T19:02:41Z")

</div>

Perhaps the regulator is just loose,remove door panel and check.