# Pops a dent

**URL:** <https://community.cartalk.com/t/pops-a-dent/49208>\
**Category:** The Show\
**Created:** [May 22, 2010, 7:17pm UTC](https://community.cartalk.com/t/pops-a-dent/49208 "2010-05-22T19:17:23Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![nowmaybe](https://avatars.discourse-cdn.com/v4/letter/n/8edcca/32.png) [@nowmaybe](https://community.cartalk.com/u/nowmaybe)\
**Post date:** [May 22, 2010, 7:17pm UTC](https://community.cartalk.com/t/pops-a-dent/49208/1 "2010-05-22T19:17:23Z")

</div>

I got the pops a dent tool from my local oarts store. $19.95, no shipping involved. I had a Cougar that got hailed on. It had dozens of littly debts about the diameter of a quarter. The tool had a section cup about that same diameter. Unfortunately it did not work. The dents were too small in relationship to the suction cup which was glued to the dents I tried to pop. I also tried it using ?hot melt glue?. That didn’t do any better.  
  
  
  
 On the other hand, I have had some pretty fair luck pulling larger circular dents with a big 4" rubber suction cup. It is not one of those little plastic jobs, but was originally made for carrying sheets of glass. It has an aluminum frame.