# Plymouth Breeze won't stay running

**URL:** <https://community.cartalk.com/t/plymouth-breeze-wont-stay-running/50919>\
**Category:** Maintenance/Repairs\
**Tags:** plymouth, breeze\
**Created:** [June 26, 2010, 6:42pm UTC](https://community.cartalk.com/t/plymouth-breeze-wont-stay-running/50919 "2010-06-26T18:42:57Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![smokin\_hot](https://avatars.discourse-cdn.com/v4/letter/s/4af34b/32.png) [@smokin\_hot](https://community.cartalk.com/u/smokin_hot)\
**Post date:** [June 26, 2010, 6:42pm UTC](https://community.cartalk.com/t/plymouth-breeze-wont-stay-running/50919/1 "2010-06-26T18:42:57Z")

</div>

'96 Plymouth Breeze runs fine for about 10-15 minutes then shuts down and won’t start again. If let sit for a while (10-15 min.), it will start again but then shuts down again after about 10-15 minutes. Battery, coil pack and timing belt have all been replaced. Any ideas?

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [June 26, 2010, 7:04pm UTC](https://community.cartalk.com/t/plymouth-breeze-wont-stay-running/50919/2 "2010-06-26T19:04:31Z")

</div>

A faulty crankshaft position sensor can cause this problem. The crankshaft position sensor is threaded into the block, and is located above the oil filter.

Tester

---

<div class="post-metadata">

**Author:** ![smokin\_hot](https://avatars.discourse-cdn.com/v4/letter/s/4af34b/32.png) [@smokin\_hot](https://community.cartalk.com/u/smokin_hot)\
**Post date:** [June 26, 2010, 11:39pm UTC](https://community.cartalk.com/t/plymouth-breeze-wont-stay-running/50919/3 "2010-06-26T23:39:59Z")

</div>

I’ll have that checked - thanks for the help!