# Please diagnose my brake problem

**URL:** <https://community.cartalk.com/t/please-diagnose-my-brake-problem/12937>\
**Category:** Maintenance/Repairs\
**Created:** [April 16, 2008, 2:01pm UTC](https://community.cartalk.com/t/please-diagnose-my-brake-problem/12937 "2008-04-16T14:01:39Z")\
**Posts on this page:** 1\
**Page:** 2

<div class="post-metadata">

**Author:** ![keith](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/keith/32/5518_2.png) [@keith](https://community.cartalk.com/u/keith)\
**Post date:** [April 19, 2008, 2:21am UTC](https://community.cartalk.com/t/please-diagnose-my-brake-problem/12937/21 "2008-04-19T02:21:09Z")

</div>

During normal braking, you are not taxing the system that hard so you don’t really know that all is well. What you think is only 30-40% of your braking capacity might really be closer to 80-90%. Under emergency conditions, you find out that the brakes really aren’t up to par.

I went through this on our 86 Tercel a while ago. It got totaled before I figured it out, but I recently did the brakes in my truck. I used the same pads that I have always relied on, and they just don’t work like they used to. These are the same pads I used on the Tercel so now I suspect the pads that I have been using all these years have suddenly dropped in quality. BTW the truck is Nissan with rear anti-lock brakes similar to your Dakota.

It could be the master cylinder or booster, both are expensive experiments. I’d go for the master cylinder first, but I think before that, I would suggest that you try some composite brake pads that use Aramide or carbon fibers. These have better grip than either semi metallic or ceramic pads.

[Previous page](https://community.cartalk.com/t/please-diagnose-my-brake-problem/12937.md?page=1)
