# Plastic rearview mirror button

**URL:** <https://community.cartalk.com/t/plastic-rearview-mirror-button/86656>\
**Category:** Maintenance/Repairs\
**Created:** [August 17, 2014, 4:31am UTC](https://community.cartalk.com/t/plastic-rearview-mirror-button/86656 "2014-08-17T04:31:54Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Geezer01](https://avatars.discourse-cdn.com/v4/letter/g/cab0a1/32.png) [@Geezer01](https://community.cartalk.com/u/Geezer01)\
**Post date:** [August 17, 2014, 4:31am UTC](https://community.cartalk.com/t/plastic-rearview-mirror-button/86656/1 "2014-08-17T04:31:54Z")

</div>

My 2002 Buick Rendezvous has a plastic button on the inside of the windshield (yes I know the difference between plastic and glue or adhesive) where the rear view mirror used to be attached. I worked at GM for 25 yrs. (Moraine Assembly) and it was never GM policy to pay for a part and pay to have it installed if they didn’t think it needed or necessary. (the clear plastic button) Does anyone know what this button is for ? My dealer (Lang’s Chevrolet) says that there is a service recommendation that the windshield be replaced if the rear view mirror falls off, so he would not recommend that I try to scrape off the plastic button. GM’s rearview mirror adhesive kit, as well as the after market adhesive kits say that they will not adhere to plastic., and I can attest that they will not.  
.What is an old geezer supposed to do?

---

<div class="post-metadata">

**Author:** ![SteveC76](https://avatars.discourse-cdn.com/v4/letter/s/958977/32.png) [@SteveC76](https://community.cartalk.com/u/SteveC76)\
**Post date:** [August 17, 2014, 5:17am UTC](https://community.cartalk.com/t/plastic-rearview-mirror-button/86656/2 "2014-08-17T05:17:58Z")

</div>

I would call a local car glass shop and ask them. It would suck to have to replace the glass because of this.

---

<div class="post-metadata">

**Author:** ![insightful](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/insightful/32/2732_2.png) [@insightful](https://community.cartalk.com/u/insightful)\
**Post date:** [August 17, 2014, 6:13am UTC](https://community.cartalk.com/t/plastic-rearview-mirror-button/86656/3 "2014-08-17T06:13:21Z")

</div>

Could it have been a radar detector mount?

---

<div class="post-metadata">

**Author:** ![VOLVO-V70](https://avatars.discourse-cdn.com/v4/letter/v/8e8cbc/32.png) [@VOLVO-V70](https://community.cartalk.com/u/VOLVO-V70)\
**Post date:** [August 17, 2014, 6:18am UTC](https://community.cartalk.com/t/plastic-rearview-mirror-button/86656/4 "2014-08-17T06:18:37Z")

</div>

Any reason you could not mount the mirror just below the plastic button or beside it?

---

<div class="post-metadata">

**Author:** ![pleasedodgevan2](https://avatars.discourse-cdn.com/v4/letter/p/ad7895/32.png) [@pleasedodgevan2](https://community.cartalk.com/u/pleasedodgevan2)\
**Post date:** [August 17, 2014, 8:15am UTC](https://community.cartalk.com/t/plastic-rearview-mirror-button/86656/5 "2014-08-17T08:15:39Z")

</div>

If that glue won’t adhere to plastic maybe Krazy glue will. It’s no good on glass but maybe it works on plastic. Relocating the mirror sounds good too.
