# Patch a small hole in a convertible top?

**URL:** <https://community.cartalk.com/t/patch-a-small-hole-in-a-convertible-top/18763>\
**Category:** Maintenance/Repairs\
**Created:** [August 27, 2008, 11:01pm UTC](https://community.cartalk.com/t/patch-a-small-hole-in-a-convertible-top/18763 "2008-08-27T23:01:18Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![1981.911.SC](https://avatars.discourse-cdn.com/v4/letter/1/c6cbf5/32.png) [@1981.911.SC](https://community.cartalk.com/u/1981.911.SC)\
**Post date:** [August 27, 2008, 11:01pm UTC](https://community.cartalk.com/t/patch-a-small-hole-in-a-convertible-top/18763/1 "2008-08-27T23:01:18Z")

</div>

1999 Miata. I’m not too concerned about cosmetics but do want function. I have a small slit, 1/8th inch long, in the top. Has anyone had any success with a glued on patch? What kind of fabric? What kind of glue? Thanks

---

<div class="post-metadata">

**Author:** ![Joseph\_E\_Meehan](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/joseph_e_meehan/32/21_2.png) [@Joseph\_E\_Meehan](https://community.cartalk.com/u/Joseph_E_Meehan)\
**Post date:** [August 27, 2008, 11:51pm UTC](https://community.cartalk.com/t/patch-a-small-hole-in-a-convertible-top/18763/2 "2008-08-27T23:51:30Z")

</div>

The glue is a contact cement. However you appear to have a nine year old top. It is not going to hold a patch well since it is no longer that strong. Likely you are going to need to replace it soon anyway. If it is the original top, time to replace it.

BTW if you have a weekend free, this can be a DIY job. Plan on a long hard weekend.

---

<div class="post-metadata">

**Author:** ![Rod-Knox](https://avatars.discourse-cdn.com/v4/letter/r/a183cd/32.png) [@Rod-Knox](https://community.cartalk.com/u/Rod-Knox)\
**Post date:** [August 28, 2008, 12:09am UTC](https://community.cartalk.com/t/patch-a-small-hole-in-a-convertible-top/18763/3 "2008-08-28T00:09:55Z")

</div>

The bimini(sp) top on my boat and the winter tarp cover also, have needed patching. A marine supplier had some tape similar to duct tape which adheres well. It was available in several colors and worked when applied to either side.

---

<div class="post-metadata">

**Author:** ![jtsanders](https://avatars.discourse-cdn.com/v4/letter/j/c2a13f/32.png) [@jtsanders](https://community.cartalk.com/u/jtsanders)\
**Post date:** [August 29, 2008, 1:13am UTC](https://community.cartalk.com/t/patch-a-small-hole-in-a-convertible-top/18763/4 "2008-08-29T01:13:57Z")

</div>

Use some duct tape until you get a new top soon.
