# Oil pan on vw beetle

**URL:** <https://community.cartalk.com/t/oil-pan-on-vw-beetle/94002>\
**Category:** General Discussion\
**Tags:** beetle, volkswagen\
**Created:** [July 23, 2016, 10:53pm UTC](https://community.cartalk.com/t/oil-pan-on-vw-beetle/94002 "2016-07-23T22:53:01Z")\
**Posts on this page:** 14\
**Page:** 2

<div class="post-metadata">

**Author:** ![smc85](https://avatars.discourse-cdn.com/v4/letter/s/da6949/32.png) [@smc85](https://community.cartalk.com/u/smc85)\
**Post date:** [July 24, 2016, 3:48am UTC](https://community.cartalk.com/t/oil-pan-on-vw-beetle/94002/22 "2016-07-24T03:48:40Z")

</div>

The bolts by the transmission where in a groove and the wobbles I used didn’t work I had 3/4 on them

---

<div class="post-metadata">

**Author:** ![ok4450](https://avatars.discourse-cdn.com/v4/letter/o/e9bcb4/32.png) [@ok4450](https://community.cartalk.com/u/ok4450)\
**Post date:** [July 24, 2016, 3:49am UTC](https://community.cartalk.com/t/oil-pan-on-vw-beetle/94002/23 "2016-07-24T03:49:19Z")

</div>

To each their own. I’m just telling you what I would do; snug them by hand and not worry one second over it.

When it comes to small diameter or long extensions, wobble sockets, and so on you might set a torque wrench at 20 Ft. Lbs and it can end up anything at the bolt head. Five, ten, who knows. A lot can get lost in translation through the extensions or bends in the socket.

The same principle applies to horsepower and torque in a rear wheel drive car for instance. X power might enter at the driveshaft yoke and much less X exit at the axles. That 90 degree bend saps some of the total.

---

<div class="post-metadata">

**Author:** ![smc85](https://avatars.discourse-cdn.com/v4/letter/s/da6949/32.png) [@smc85](https://community.cartalk.com/u/smc85)\
**Post date:** [July 24, 2016, 4:27am UTC](https://community.cartalk.com/t/oil-pan-on-vw-beetle/94002/24 "2016-07-24T04:27:04Z")

</div>

I will keep this in mind when he gets the new pan

---

<div class="post-metadata">

**Author:** ![Nevada\_545](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/nevada_545/32/41232_2.png) [@Nevada\_545](https://community.cartalk.com/u/Nevada_545)\
**Post date:** [July 24, 2016, 4:58am UTC](https://community.cartalk.com/t/oil-pan-on-vw-beetle/94002/25 "2016-07-24T04:58:43Z")

</div>

The access looks to be fairly straight, loss of torque we insignificant in this case. Knowing the difference between 15 and 40 ft/lbs is not something people are born with. Tighten all of the easy access bolts with a torque wrench, you get the feel of how tight these bolts should be and tighten the others to a reasonable amount.

---

<div class="post-metadata">

**Author:** ![smc85](https://avatars.discourse-cdn.com/v4/letter/s/da6949/32.png) [@smc85](https://community.cartalk.com/u/smc85)\
**Post date:** [July 24, 2016, 5:14am UTC](https://community.cartalk.com/t/oil-pan-on-vw-beetle/94002/26 "2016-07-24T05:14:42Z")

</div>

Okay thanks I will try that

---

<div class="post-metadata">

**Author:** ![smc85](https://avatars.discourse-cdn.com/v4/letter/s/da6949/32.png) [@smc85](https://community.cartalk.com/u/smc85)\
**Post date:** [July 25, 2016, 11:33pm UTC](https://community.cartalk.com/t/oil-pan-on-vw-beetle/94002/27 "2016-07-25T23:33:33Z")

</div>

Okay one thing I for got to mention there was a part that was broken as soon as I took the pan down it was hanging and I noticed just one bolt holds it in place now I mentioned it to my father in-law and he doesn’t want to get that part so if someone on here knows what I’m saying is that part important I will try to get more information in a bit

---

<div class="post-metadata">

**Author:** ![Nevada\_545](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/nevada_545/32/41232_2.png) [@Nevada\_545](https://community.cartalk.com/u/Nevada_545)\
**Post date:** [July 25, 2016, 11:44pm UTC](https://community.cartalk.com/t/oil-pan-on-vw-beetle/94002/28 "2016-07-25T23:44:38Z")

</div>

If the oil pick-up tube is broken the oil pump may draw air and not oil from the pan. Is this the part that is broken?

 ![](https://global.discourse-cdn.com/cartalk/original/2X/d/d704ae7fd70924e236fb69b87266c2b743b0d456.jpg)

---

<div class="post-metadata">

**Author:** ![smc85](https://avatars.discourse-cdn.com/v4/letter/s/da6949/32.png) [@smc85](https://community.cartalk.com/u/smc85)\
**Post date:** [July 26, 2016, 12:05am UTC](https://community.cartalk.com/t/oil-pan-on-vw-beetle/94002/29 "2016-07-26T00:05:10Z")

</div>

No not that it’s plastic it sits right over that

---

<div class="post-metadata">

**Author:** ![smc85](https://avatars.discourse-cdn.com/v4/letter/s/da6949/32.png) [@smc85](https://community.cartalk.com/u/smc85)\
**Post date:** [July 26, 2016, 2:40am UTC](https://community.cartalk.com/t/oil-pan-on-vw-beetle/94002/30 "2016-07-26T02:40:31Z")

</div>

Okay it’s the windage tray it broke right where it bolts on

---

<div class="post-metadata">

**Author:** ![smc85](https://avatars.discourse-cdn.com/v4/letter/s/da6949/32.png) [@smc85](https://community.cartalk.com/u/smc85)\
**Post date:** [July 30, 2016, 8:06pm UTC](https://community.cartalk.com/t/oil-pan-on-vw-beetle/94002/31 "2016-07-30T20:06:31Z")

</div>

Well got it all buttoned up just waiting for the liquid gasket to dry says 24 hours hope everything turns out great

---

<div class="post-metadata">

**Author:** ![smc85](https://avatars.discourse-cdn.com/v4/letter/s/da6949/32.png) [@smc85](https://community.cartalk.com/u/smc85)\
**Post date:** [July 31, 2016, 12:51am UTC](https://community.cartalk.com/t/oil-pan-on-vw-beetle/94002/32 "2016-07-31T00:51:37Z")

</div>

Ok off subject for a little how do I know to pick right socket I a socket I was using it was fine till I tightened up the next bolt then the socket began to to round then it wasn’t working I know the saying you get what you pay for but when buying cheap tools is there something to look for like type of metal it’s made from or something

---

<div class="post-metadata">

**Author:** ![smc85](https://avatars.discourse-cdn.com/v4/letter/s/da6949/32.png) [@smc85](https://community.cartalk.com/u/smc85)\
**Post date:** [July 31, 2016, 4:17pm UTC](https://community.cartalk.com/t/oil-pan-on-vw-beetle/94002/33 "2016-07-31T16:17:16Z")

</div>

Well I have a leak s.o.b

---

<div class="post-metadata">

**Author:** ![smc85](https://avatars.discourse-cdn.com/v4/letter/s/da6949/32.png) [@smc85](https://community.cartalk.com/u/smc85)\
**Post date:** [July 31, 2016, 4:37pm UTC](https://community.cartalk.com/t/oil-pan-on-vw-beetle/94002/34 "2016-07-31T16:37:45Z")

</div>

Well it looks like water is leaking and it was overheating well the heat lamp came on see I really don’t know if there was internal damage he just told me he hit a really big rock I will keep everyone posted

---

<div class="post-metadata">

**Author:** ![smc85](https://avatars.discourse-cdn.com/v4/letter/s/da6949/32.png) [@smc85](https://community.cartalk.com/u/smc85)\
**Post date:** [July 31, 2016, 6:05pm UTC](https://community.cartalk.com/t/oil-pan-on-vw-beetle/94002/35 "2016-07-31T18:05:55Z")

</div>

Well I’m seeing a leak now but something seems to be wrong with his heating system and the oil light keeps going on and off

[Previous page](https://community.cartalk.com/t/oil-pan-on-vw-beetle/94002.md?page=1)
