# Noise with turning to the left

**URL:** <https://community.cartalk.com/t/noise-with-turning-to-the-left/28152>\
**Category:** Maintenance/Repairs\
**Created:** [March 22, 2009, 7:53pm UTC](https://community.cartalk.com/t/noise-with-turning-to-the-left/28152 "2009-03-22T19:53:00Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![cranjx](https://avatars.discourse-cdn.com/v4/letter/c/9f8e36/32.png) [@cranjx](https://community.cartalk.com/u/cranjx)\
**Post date:** [March 22, 2009, 7:53pm UTC](https://community.cartalk.com/t/noise-with-turning-to-the-left/28152/1 "2009-03-22T19:53:00Z")

</div>

I have a 99 Hyundai Elantra Sedan, Automatic Transmission with about 80,000 miles on it. For the past month I have noticed a high pitched noise coming from the left front side of my car any time I turn the wheel to the left. It only occurs while the car is moving. It can occur with even a slight turn to the left and does get a little louder with a harder turn to the left. It goes completely away when driving straight and never occurs when turning to the right. Just some hx - I had 4 new tires placed on the care about 6 months ago and the brakes were replaced about 3 years ago. Any ideas?  
  
  
  
 Thanks

---

<div class="post-metadata">

**Author:** ![VDCdriver](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/vdcdriver/32/30_2.png) [@VDCdriver](https://community.cartalk.com/u/VDCdriver)\
**Post date:** [March 22, 2009, 8:01pm UTC](https://community.cartalk.com/t/noise-with-turning-to-the-left/28152/2 "2009-03-22T20:01:54Z")

</div>

My prime suspect would be a bad CV joint.

---

<div class="post-metadata">

**Author:** ![novafan](https://avatars.discourse-cdn.com/v4/letter/n/a3d4f5/32.png) [@novafan](https://community.cartalk.com/u/novafan)\
**Post date:** [March 22, 2009, 8:11pm UTC](https://community.cartalk.com/t/noise-with-turning-to-the-left/28152/3 "2009-03-22T20:11:37Z")

</div>

It might be a brake pad wear indicator just starting to kiss the brake rotor (disc brakes).

A wheel bearing would be a lower frequency noise, more a rumble than a squeal. 80K is a little early for one of these to go, but they can and will become noisy one side at a time.
