# Noise and Vibration

**URL:** <https://community.cartalk.com/t/noise-and-vibration/68635>\
**Category:** Maintenance/Repairs\
**Tags:** cr-v, honda\
**Created:** [October 14, 2011, 5:34pm UTC](https://community.cartalk.com/t/noise-and-vibration/68635 "2011-10-14T17:34:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![john7020](https://avatars.discourse-cdn.com/v4/letter/j/7ba0ec/32.png) [@john7020](https://community.cartalk.com/u/john7020)\
**Post date:** [October 14, 2011, 5:34pm UTC](https://community.cartalk.com/t/noise-and-vibration/68635/1 "2011-10-14T17:34:03Z")

</div>

I have a 2002 Honda CRV-LX with over 200,000 miles. I’m experiencing a loud hum and vibration between 40 and 50 mph on acceleration and deceleration. It occurs when I’m driving straight or turning left, but goes away when I turn right.

---

<div class="post-metadata">

**Author:** ![cigroller](https://avatars.discourse-cdn.com/v4/letter/c/c68b51/32.png) [@cigroller](https://community.cartalk.com/u/cigroller)\
**Post date:** [October 14, 2011, 6:05pm UTC](https://community.cartalk.com/t/noise-and-vibration/68635/2 "2011-10-14T18:05:36Z")

</div>

You probably need a new wheel bearing on your passenger’s side. Whether front or rear you might have a guess but will probably have to wait for inspection. If the bearings are the same age its probably a good idea to just have both sides done - when one goes the other is often not far behind.

Do not wait. A bad wheel bearing is bad.