# No power

**URL:** <https://community.cartalk.com/t/no-power/60580>\
**Category:** Maintenance/Repairs\
**Tags:** chevrolet\
**Created:** [January 28, 2011, 11:16pm UTC](https://community.cartalk.com/t/no-power/60580 "2011-01-28T23:16:19Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![tommykersh](https://avatars.discourse-cdn.com/v4/letter/t/858c86/32.png) [@tommykersh](https://community.cartalk.com/u/tommykersh)\
**Post date:** [January 28, 2011, 11:16pm UTC](https://community.cartalk.com/t/no-power/60580/1 "2011-01-28T23:16:19Z")

</div>

5.7 vortec has like a dead spot in gas pedal. no power really bad going up hill. new gas pump, tps

---

<div class="post-metadata">

**Author:** ![edb1961](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/edb1961/32/122_2.png) [@edb1961](https://community.cartalk.com/u/edb1961)\
**Post date:** [January 28, 2011, 11:19pm UTC](https://community.cartalk.com/t/no-power/60580/2 "2011-01-28T23:19:57Z")

</div>

How about a year and a model. Mileage and recent maintenance would help. What was the rationale for replacing the fuel pump and TPS?

---

<div class="post-metadata">

**Author:** ![tommykersh](https://avatars.discourse-cdn.com/v4/letter/t/858c86/32.png) [@tommykersh](https://community.cartalk.com/u/tommykersh)\
**Post date:** [January 28, 2011, 11:21pm UTC](https://community.cartalk.com/t/no-power/60580/3 "2011-01-28T23:21:44Z")

</div>

2000 3500 , the garage said low pressure.

---

<div class="post-metadata">

**Author:** ![cigroller](https://avatars.discourse-cdn.com/v4/letter/c/c68b51/32.png) [@cigroller](https://community.cartalk.com/u/cigroller)\
**Post date:** [January 28, 2011, 11:41pm UTC](https://community.cartalk.com/t/no-power/60580/4 "2011-01-28T23:41:39Z")

</div>

And did you start with a fuel filter before the fuel pump? After putting the new pump in how is the pressure? Was there a known problem with the tps or was it a guess? If there was a known problem did anyone check the wiring for the tps? If it has a MAF sensor, clean it.
