# Need Help On Pinouts For ECM

**URL:** <https://community.cartalk.com/t/need-help-on-pinouts-for-ecm/43034>\
**Category:** Maintenance/Repairs\
**Tags:** neon, dodge\
**Created:** [January 22, 2010, 10:10pm UTC](https://community.cartalk.com/t/need-help-on-pinouts-for-ecm/43034 "2010-01-22T22:10:57Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Skypilot](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/skypilot/32/237_2.png) [@Skypilot](https://community.cartalk.com/u/Skypilot)\
**Post date:** [January 22, 2010, 10:10pm UTC](https://community.cartalk.com/t/need-help-on-pinouts-for-ecm/43034/1 "2010-01-22T22:10:57Z")

</div>

Putting a cruise control on wifes 2004 Dodge Neon SXT with 2.0 liter engine and auto transmission. I need to get the ECM connector and connector to ECM pinout numbers. Trying to connect the VSS sensor to the ECM. Thanks for any help!

---

<div class="post-metadata">

**Author:** ![hellokit](https://avatars.discourse-cdn.com/v4/letter/h/6a8cbe/32.png) [@hellokit](https://community.cartalk.com/u/hellokit)\
**Post date:** [January 22, 2010, 10:26pm UTC](https://community.cartalk.com/t/need-help-on-pinouts-for-ecm/43034/2 "2010-01-22T22:26:05Z")

</div>

When I need a pinout chart for electrical connectors, I go to my public library and go on their subscription paid Web site to [www.alldata.com](http://www.alldata.com). There, I click on “connector views”, and print out the diagrams.

---

<div class="post-metadata">

**Author:** ![Skypilot](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/skypilot/32/237_2.png) [@Skypilot](https://community.cartalk.com/u/Skypilot)\
**Post date:** [January 22, 2010, 11:19pm UTC](https://community.cartalk.com/t/need-help-on-pinouts-for-ecm/43034/3 "2010-01-22T23:19:39Z")

</div>

Thanks Hellokit. Was hopping someone on here might have it. I’m getting lazy in my old age! LOL

---

<div class="post-metadata">

**Author:** ![Skypilot](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/skypilot/32/237_2.png) [@Skypilot](https://community.cartalk.com/u/Skypilot)\
**Post date:** [January 23, 2010, 12:11am UTC](https://community.cartalk.com/t/need-help-on-pinouts-for-ecm/43034/4 "2010-01-23T00:11:15Z")

</div>

Went ahead and sighned up for AllData and got the info needed. Thanks hellokit!

---

<div class="post-metadata">

**Author:** ![vtcodger2](https://avatars.discourse-cdn.com/v4/letter/v/e68b1a/32.png) [@vtcodger2](https://community.cartalk.com/u/vtcodger2)\
**Post date:** [January 23, 2010, 6:26am UTC](https://community.cartalk.com/t/need-help-on-pinouts-for-ecm/43034/5 "2010-01-23T06:26:41Z")

</div>

Keep in mind that all the wires to the ECM are color coded and the electrons really don’t care much where in the line you connect. If it is easier to pick up the signal you need someplace other than at the ECM, that will probably work. The color codes should be available from Alldata or in a Haynes or Chilton manual if there is one. They might even be on line somewhere.