# My jerkey 93 Eord Aerostar

**URL:** <https://community.cartalk.com/t/my-jerkey-93-eord-aerostar/34776>\
**Category:** Maintenance/Repairs\
**Tags:** aerostar, ford\
**Created:** [August 9, 2009, 6:55pm UTC](https://community.cartalk.com/t/my-jerkey-93-eord-aerostar/34776 "2009-08-09T18:55:38Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![valoister](https://avatars.discourse-cdn.com/v4/letter/v/ce7236/32.png) [@valoister](https://community.cartalk.com/u/valoister)\
**Post date:** [August 9, 2009, 6:55pm UTC](https://community.cartalk.com/t/my-jerkey-93-eord-aerostar/34776/1 "2009-08-09T18:55:38Z")

</div>

When I drive this vehicle in overdrive which I only use on the highway, it sometimes starts to jerk. The speedometer doesn’t move, and the Trans fluid is clean and new as I just changed the screen, and cleaned out the pan. I didn’t fins any metal shavings in the pan to lead me to believe the trans is junk, and it only has 25000 mls on a rebuild. I have been told it’s the sensor on the end of the speedo cable that is going bad, but my check engine light doesn’t stay on long enough to get a code reading. The vehicle doesn’t jerk when I drive if in drive, but the check engine light still comes on, I thought I should get a 2nd opp-onion If the trans before I start buying sensors I don’t need. If it is the trans going out I think I will change it to a stick is that going to be very hard to do?