# Modifying a Subaru Legacy

**URL:** <https://community.cartalk.com/t/modifying-a-subaru-legacy/5247>\
**Category:** Maintenance/Repairs\
**Created:** [September 29, 2007, 12:50am UTC](https://community.cartalk.com/t/modifying-a-subaru-legacy/5247 "2007-09-29T00:50:41Z")\
**Posts on this page:** 12\
**Page:** 2

<div class="post-metadata">

**Author:** ![It\_s-Me](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/it_s-me/32/12660_2.png) [@It\_s-Me](https://community.cartalk.com/u/It_s-Me)\
**Post date:** [December 19, 2020, 2:15pm UTC](https://community.cartalk.com/t/modifying-a-subaru-legacy/5247/21 "2020-12-19T14:15:49Z")

</div>

> [@bigdogs2\_158797](#):
>
> I have a rebuilt engine with about 110,000

It’s no longer a rebuilt engine, it’s a well used engine with 110,000 miles on it.

---

<div class="post-metadata">

**Author:** ![Cavell](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/cavell/32/43396_2.png) [@Cavell](https://community.cartalk.com/u/Cavell)\
**Post date:** [December 19, 2020, 2:23pm UTC](https://community.cartalk.com/t/modifying-a-subaru-legacy/5247/22 "2020-12-19T14:23:12Z")

</div>

They fixed heads 100k ago. About time to Fail again.

---

<div class="post-metadata">

**Author:** ![ok4450](https://avatars.discourse-cdn.com/v4/letter/o/e9bcb4/32.png) [@ok4450](https://community.cartalk.com/u/ok4450)\
**Post date:** [December 19, 2020, 4:26pm UTC](https://community.cartalk.com/t/modifying-a-subaru-legacy/5247/23 "2020-12-19T16:26:02Z")

</div>

Just for hoots, you might consider running a compression test on the engine to see if compression is dropping. Lowered compression can lead to lack of power and decreased fuel economy. Yes, I know you said the engine was rebuilt but that was a while back and a lot depends upon how the word “rebuilt” is defined.  
A round piston ring in an egged and tapered cylinder bore is inferior to boring and new pistons. I also kind of wonder how this car ended up needing a new engine at the 70k miles mark. That’s unusual.

As mentioned, hills can be a mileage killer and especially so with smaller displacement engines. The stoichiometric ratio only goes so far and you can’t get blood out of a turnip. Synthetic oil, air filter, high octane gas, etc is not going to make much of a difference no matter what.

---

<div class="post-metadata">

**Author:** ![bigdogs2\_158797](https://avatars.discourse-cdn.com/v4/letter/b/edb3f5/32.png) [@bigdogs2\_158797](https://community.cartalk.com/u/bigdogs2_158797)\
**Post date:** [December 19, 2020, 5:05pm UTC](https://community.cartalk.com/t/modifying-a-subaru-legacy/5247/24 "2020-12-19T17:05:53Z")

</div>

I don’t understand. They don’t make the 2.2 anymore. In order to rebuild an engine of this kind how would someone do this?

I bought the car from a private party that deals in these kinds of cars and the engine I had in it when I bought it had a cylinder that was going bad and was taking a lot of oil. He guaranteed his work and so he put another engine in it and said it was a rebuilt engine. The engine/car I have driven so far and have put a lot of miles on it hardly takes any oil now. He told me it was rebuilt with about 110,000 miles.

Please explain. I am new to these ways. Thank you

---

<div class="post-metadata">

**Author:** ![VDCdriver](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/vdcdriver/32/48514_2.png) [@VDCdriver](https://community.cartalk.com/u/VDCdriver)\
**Post date:** [December 19, 2020, 5:08pm UTC](https://community.cartalk.com/t/modifying-a-subaru-legacy/5247/25 "2020-12-19T17:08:16Z")

</div>

> [@bigdogs2\_158797](#):
>
> They don’t make the 2.2 anymore. In order to rebuild an engine of this kind how would someone do this?

… by obtaining the appropriate parts, which are readily available.

---

<div class="post-metadata">

**Author:** ![bigdogs2\_158797](https://avatars.discourse-cdn.com/v4/letter/b/edb3f5/32.png) [@bigdogs2\_158797](https://community.cartalk.com/u/bigdogs2_158797)\
**Post date:** [December 19, 2020, 5:23pm UTC](https://community.cartalk.com/t/modifying-a-subaru-legacy/5247/26 "2020-12-19T17:23:52Z")

</div>

Meaning that all the parts are new? Does the 2.2 engines all have new parts to rebuild an engine?

I don’t know. I’m happy with the engine that doesn’t leak oil and he had to swap engines and didn’t really make any money off the vehicle because of the work involved.

---

<div class="post-metadata">

**Author:** ![jtsanders](https://avatars.discourse-cdn.com/v4/letter/j/c2a13f/32.png) [@jtsanders](https://community.cartalk.com/u/jtsanders)\
**Post date:** [December 19, 2020, 5:32pm UTC](https://community.cartalk.com/t/modifying-a-subaru-legacy/5247/27 "2020-12-19T17:32:19Z")

</div>

The parts may be from Subaru or are aftermarket parts. Manufacturers continue to make parts for discontinued items so that repairs can be made. I wouldn’t be surprised if Subaru still made parts, or had them made, for a 20 year old engine.

---

<div class="post-metadata">

**Author:** ![ok4450](https://avatars.discourse-cdn.com/v4/letter/o/e9bcb4/32.png) [@ok4450](https://community.cartalk.com/u/ok4450)\
**Post date:** [December 20, 2020, 2:34am UTC](https://community.cartalk.com/t/modifying-a-subaru-legacy/5247/28 "2020-12-20T02:34:23Z")

</div>

I can’t answer your question about a rebuilt engine as I have no way of knowing what was done. The words “rebuilt” and “new” are a couple of the most abused words in the English language.

People come onto this forum and refer to a salvage yard engine in their car as a “new” engine when it is anything but. I’ve replaced head gaskets in an engine and the car owner tells anyone who will listen that they have a “new” engine in their car. No they do not. They have a used and possibly a half worn out engine with new head gaskets is all.

I’m trying to not be too critical here but this engine thing comes across as a tiny bit odd. I’m just saying that if it were my car I would want to know what is going on inside the cylinders. If compression is down in the 130s, 150s, etc then there is engine wear and both mileage/performance will suffer a bit; especially so with uphill driving.  
“Swap engines” does not necessarily mean rebuilt.

---

<div class="post-metadata">

**Author:** ![keith](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/keith/32/5518_2.png) [@keith](https://community.cartalk.com/u/keith)\
**Post date:** [December 24, 2020, 2:26am UTC](https://community.cartalk.com/t/modifying-a-subaru-legacy/5247/29 "2020-12-24T02:26:01Z")

</div>

> [@Mustangman](#):
>
> I stand by my “no real HP gain” statement. You might disagree and that’s OK.

Actually we agree on everything you wrote except the word “real”. I interpreted it to mean measurable where you seem to interpret it to mean “significant”

Other than that, we are in complete agreement and so I stand by my statement as well.

---

<div class="post-metadata">

**Author:** ![It\_s-Me](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/it_s-me/32/12660_2.png) [@It\_s-Me](https://community.cartalk.com/u/It_s-Me)\
**Post date:** [December 24, 2020, 12:17pm UTC](https://community.cartalk.com/t/modifying-a-subaru-legacy/5247/30 "2020-12-24T12:17:43Z")

</div>

> [@bigdogs2\_158797](#):
>
> He told me it was rebuilt with about 110,000 miles.

110,000 miles ago it was a rebuilt engine, now it’s a used engine with 110,000 miles on it.

---

<div class="post-metadata">

**Author:** ![Rod-Knox](https://avatars.discourse-cdn.com/v4/letter/r/a183cd/32.png) [@Rod-Knox](https://community.cartalk.com/u/Rod-Knox)\
**Post date:** [December 24, 2020, 4:28pm UTC](https://community.cartalk.com/t/modifying-a-subaru-legacy/5247/31 "2020-12-24T16:28:10Z")

</div>

I can’t imagine that there is a worse metropolitan area to drive a manual transmission car in than San Francisco.

---

<div class="post-metadata">

**Author:** ![bigdogs2\_158797](https://avatars.discourse-cdn.com/v4/letter/b/edb3f5/32.png) [@bigdogs2\_158797](https://community.cartalk.com/u/bigdogs2_158797)\
**Post date:** [December 24, 2020, 4:32pm UTC](https://community.cartalk.com/t/modifying-a-subaru-legacy/5247/32 "2020-12-24T16:32:22Z")

</div>

I have a friend who teaches mechanics at a local college and she ran a scan and said they was no codes indicating anything needed to be done, like a O2 sensor.  
She didn’t do a compression test though

[Previous page](https://community.cartalk.com/t/modifying-a-subaru-legacy/5247.md?page=1)
